Dual Load Wall Switch Set for Duro 2000

Product Description

The Z-Wave.Me Switch Flush Mountable is a wireless actuator able to switch two loads up to 1700 W each. Single clicks operate one load, double click operates the other load. The device is delivered as complete set with flush mountable insert, paddle and mounting frame compatible to the design of the switching series selected. The paddle of the device is used to control the device itself but can also be configured to activate scenes in a central IP gateway or controller. The device is able to meter the power consumed on the two loads if the attached load (in W) is configured correctly using a configuration parameter. The status of the switch is indicated on a dual color LED for test purposes and every status change is - if configured - reported to a central IP gateway or controller. The function of the local paddle can be configured as detached from the local operation. In this local control, different devices are controlled by Z-Wave while the local actuator is controlled by other devices using Z-Wave. This device is designed for a 3 wire system and needs a neutral wire in the wall box.