Quickstart

This is a Z-Wave Device for XXXQFrequencyName. To run this device please connect it to your mains power supply.



Important safety information

Please read this manual carefully. Failure to follow the recommendations in this manual may be dangerous or may violate the law. The manufacturer, importer, distributor and seller shall not be liable for any loss or damage resulting from failure to comply with the instructions in this manual or any other material. Use this equipment only for its intended purpose. Follow the disposal instructions. Do not dispose of electronic equipment or batteries in a fire or near open heat sources.

Product Description

The RaZberry turns every Raspberry PI into a Z-Wave Home Automation Gateway. The bundle of hardware and precompiled Z-Wave wireless network management software waits to be completed by your own user interface running in a web browser or a mobile phone. The Z-Wave software offers an easy to understand and easy to use interface applying the well-known Java Script interface technology JSON on a built in web server. Writing your own home automation app was never easier and never more affordable. The RaZberry consists of four parts:

  • Z-Wave transceiver pluggable to the GPIO interface of the Raspberry PI
  • Optimized transceiver firmware running on the Z-Wave transceiver chip
  • Certified Z-Wave communication stack Z-Way - running on the Raspberry PI and offering a web based interface
  • Z-Way AJAX based demo User Interface for easy access to all Z-Wave functions of Z-Way and as a reference for own User Interface enhancements.

 

Reset to factory default XXXResetDescription
Inclusion XXXInclusionDescription
Exclusion XXXExclusionDescription
NIF XXXNIF
Wakeup XXXWakeupDescription
Protection XXXProtection
FirmwareUpdate XXXFirmwareUpdate
SetAssociation XXXSetAssociation

Technical Data

Dimensions 0.0200000x0.0420000x0.0120000 mm
EAN 0019962008306
Certification ID ZC10-14110009
Frequency USA - 908.4MHz, 916MHz
Maximum transmission power 5 mW
USAZ-Wave Device