Quickstart

This is a Z-Wave Device for XXXQFrequencyName. To run this device please connect it to your mains power supply.



Important safety information

Please read this manual carefully. Failure to follow the recommendations in this manual may be dangerous or may violate the law. The manufacturer, importer, distributor and seller shall not be liable for any loss or damage resulting from failure to comply with the instructions in this manual or any other material. Use this equipment only for its intended purpose. Follow the disposal instructions. Do not dispose of electronic equipment or batteries in a fire or near open heat sources.

Product Description

The smart bulb by YEELIGHT, the YEELIGHT LED GU10 Smart Bulb W1 Multicolour Wi-Fi, can switch between 16 million colours as well as warm and cool white (from 2,700 K to 6,500 K), is dimmable and has a GU10 socket. Adjust the light colour, brightness and colour according to your individual wishes. Thus, it allows you to create the perfect illumination for any event. 

YEELIGHT belongs to the Xiaomi Ecosystem, so you can use both the YEELIGHT and the Xiaomi app. You can easily control the light via your smartphone with the YEELIGHT or Xiaomi app, or via voice command with Google, Alexa or SmartThings. You may also switch the light on and off in the traditional way via the light switch.

The own app or the SmartThings app can be used to set automatic on/off schedules and to combine multiple lamps to control them simultaneously. The GU10 W1 bulb has a 36° viewing angle, so the light illuminates the entire room.

Control your YEELIGHT LED GU10 Smart Bulb W1 Multicolour Wi-Fi at any time while away from home. Switch off the light from anywhere in case you forget to do so. For example, simulate presence while you are on holiday.

In three simple steps you can install the GU10 Smart Bulb W1: turn the bulb into the socket, download the YEELIGHT app and add the bulb. Thanks to Wi-Fi, you will not need a hub or gateway, just your Wi-Fi network.

With a low power consumption of 4.8 watts and a long service life, this bulb is both money- and energy-saving. 

Its high compatibility with various systems such as SmartThings, Homey, Amazon Alexa or Google Assistant enables multiple uses.

Features: 

  • GU10 Smart Bulb W1 Multicolor Wi-Fi
  • Compatible with Aeotec SmartThings, Homey, Google Assistant, Amazon Alexa and lots more
  • Model: YLDP004-A
  • Rated power: 4.5 W
  • Luminous flux: 350 lumen
  • Size: 50 x 54 mm
  • Rated input: 220-240 V ~ 50/60 Hz 50 mA
  • Colour temperature: 2,700 to 6,500 K
  • Connectivity: Wi-Fi IEEE 802.11 b/g/n 2.4G
  • Operating temperature: -10°C to +40°C
  • Humidity: RH 0% to 85
  • Voice control
  • App control
  • Dimmable
  • Energy-saving mode
  • Scope of delivery: 1x YEELIGHT LED GU10 Smart Bulb W1 Multicolor Wi-Fi, user manual (DE/EN)

Download high resolution images for YEELIGHT products.

 

Reset to factory default XXXResetDescription
Inclusion XXXInclusionDescription
Exclusion XXXExclusionDescription
NIF XXXNIF
Wakeup XXXWakeupDescription
Protection XXXProtection
FirmwareUpdate XXXFirmwareUpdate
SetAssociation XXXSetAssociation

Technical Data

Dimensions 0.0500000x0.0500000x0.0550000 mm
Weight 44 gr
EAN 0608887786798
Frequency XXfrequency
Maximum transmission power XXantenna
Z-Wave Device