TESLA Smart Home

TechToy Smart Bulb RGB 4.7W GU10 Zigbee

SKU: TSLZLIG-GU10ZB

Quickstart

This is a Z-Wave Device for . To run this device please connect it to your mains power supply.

Important safety information

Please read this manual carefully. Failure to follow the recommendations in this manual may be dangerous or may violate the law. The manufacturer, importer, distributor and seller shall not be liable for any loss or damage resulting from failure to comply with the instructions in this manual or any other material. Use this equipment only for its intended purpose. Follow the disposal instructions. Do not dispose of electronic equipment or batteries in a fire or near open heat sources.

What is Z-Wave?

Z-Wave is the international wireless protocol for communication in the Smart Home. This device is suited for use in the region mentioned in the Quickstart section.

Z-Wave ensures a reliable communication by reconfirming every message (two-way communication) and every mains powered node can act as a repeater for other nodes (meshed network) in case the receiver is not in direct wireless range of the transmitter.

This device and every other certified Z-Wave device can be used together with any other certified Z-Wave device regardless of brand and origin as long as both are suited for the same frequency range.

If a device supports secure communication it will communicate with other devices secure as long as this device provides the same or a higher level of security. Otherwise it will automatically turn into a lower level of security to maintain backward compatibility.

For more information about Z-Wave technology, devices, white papers etc. please refer to www.z-wave.info.

Product Description

Smart lighting has been an integral part of many homes for a while now. Whether smart technology users are looking for convenience, savings or simply to create an atmosphere, a smart light bulb satisfies all requirements.

Energy saving.
This is the ideal smart bulb for users who are looking for an energy efficient and stylish light source, but also want a high level of lighting comfort.

ZigBee protocol.
Technology is part of our daily lives. The TechToy bulb uses the efficient ZigBee protocol to connect to your smart home.

Up to 16 million colours.
The TechToy GU10 smart bulb can light up your room with up to 16 million colours, while it can also control colour temperature from 2,200 to 6,500 K and supports dimming.

TESLA Smart app.
Control your TechToy smart lights with the TESLA Smart app. An easy-to-use interface gives you access to all settings and automation options so you can fine-tune the way your bulb works.

The modern way of lighting your home.
We know how important colour temperature is when you"re trying to rest and relax. In addition to all colour settings, the bulb also supports changing the colour temperature from 2,200 to 6,500 K. This allows you to set the smart bulb to make the lighting look great in any room of your smart home.

Extremely low energy consumption.
With a consumption of only 4.7 W, TechToy smart bulbs contribute to a significant reduction in your electricity bills. You can use them as ambient lighting in a room, but in larger numbers they can also be used as main lighting. With an electrical input of 4.7 W and a luminosity of 345 lm, it is an energy efficient light bulb.

Automate your lights with the TESLA Smart app.
Lights no longer have to be switched on or off with a conventional switch. If you don’t want to have one then you don’t need a switch at all. The entire lighting system can be conveniently controlled via the Tesla Smart app, which works in English. Here you can also set up smart scenarios. For example, the lights can turn on the moment your smart door sensor detects you entering your home and then turn off when you leave.

Zigbbee protocol.
TechToy Smart Bulbs use the advanced ZigBee wireless protocol to connect to your smart home. To make the smart light bulbs work, you must also have a Tesla Smart ZigBee Hub. It connects all smart elements that do not have their own built-in Wi-Fi module and so work with the ZigBee protocol. And this brings a number of benefits. The most significant is the low energy consumption of these products. The data flow between the ZigBee central unit and your Tesla Smart app is low, so the 2.4Ghz bandwidth on your wireless network won’t be overburdened. The mixed network topology (mesh topology) then ensures that the ecosystem functions properly even if one of the elements of the smart home suddenly stops working. Last but not least, compatibility across manufacturers is a distinct advantage.

Features:

Smart Bulb RGB 4,7W GU10 Zigbee
ID: TSL-LIG-GU10ZB
Color of Light: RGB (16 million colours), Cold white, Warm white
Light Temperature: 2200?6500 K
Luminous Flux: 345 lm
Socket: GU10
Rated Power: 4.7 W
Power supply: 220?240 V AC 50/60Hz
Operating Temperature: -20?50 °C
Dimensions: 54 x 50 mm
Connectivity: Zigbee
App TESLA Smart: Google Android 6.0+, Apple iOS 11.0+

Prepare for Installation / Reset

Please read the user manual before installing the product.

In order to include (add) a Z-Wave device to a network it must be in factory default state. Please make sure to reset the device into factory default. You can do this by performing an Exclusion operation as described below in the manual. Every Z-Wave controller is able to perform this operation however it is recommended to use the primary controller of the previous network to make sure the very device is excluded properly from this network.

Safety Warning for Mains Powered Devices

ATTENTION: only authorized technicians under consideration of the country-specific installation guidelines/norms may do works with mains power. Prior to the assembly of the product, the voltage network has to be switched off and ensured against re-switching.

Inclusion/Exclusion

On factory default the device does not belong to any Z-Wave network. The device needs to be added to an existing wireless network to communicate with the devices of this network. This process is called Inclusion.

Devices can also be removed from a network. This process is called Exclusion. Both processes are initiated by the primary controller of the Z-Wave network. This controller is turned into exclusion respective inclusion mode. Inclusion and Exclusion is then performed doing a special manual action right on the device.

Quick trouble shooting

Here are a few hints for network installation if things dont work as expected.

Make sure a device is in factory reset state before including. In doubt exclude before include.
If inclusion still fails, check if both devices use the same frequency.
Remove all dead devices from associations. Otherwise you will see severe delays.
Never use sleeping battery devices without a central controller.
Dont poll FLIRS devices.
Make sure to have enough mains powered device to benefit from the meshing

Technical Data

Dimensions	0.0500000x0.0500000x0.0540000 mm
Weight	31 gr
EAN	8596115842083
Frequency	XXfrequency
Maximum transmission power	XXantenna

Explanation of Z-Wave specific terms

Controller — is a Z-Wave device with capabilities to manage the network. Controllers are typically Gateways,Remote Controls or battery operated wall controllers.
Slave — is a Z-Wave device without capabilities to manage the network. Slaves can be sensors, actuators and even remote controls.
Primary Controller — is the central organizer of the network. It must be a controller. There can be only one primary controller in a Z-Wave network.
Inclusion — is the process of adding new Z-Wave devices into a network.
Exclusion — is the process of removing Z-Wave devices from the network.
Association — is a control relationship between a controlling device and a controlled device.
Wakeup Notification — is a special wireless message issued by a Z-Wave device to announces that is able to communicate.
Node Information Frame — is a special wireless message issued by a Z-Wave device to announce its capabilities and functions.