This is a
Z-Wave is the international wireless protocol for communication in the Smart Home. This device is suited for use in the region mentioned in the Quickstart section.
Z-Wave ensures a reliable communication by reconfirming every message (two-way communication) and every mains powered node can act as a repeater for other nodes (meshed network) in case the receiver is not in direct wireless range of the transmitter.
This device and every other certified Z-Wave device can be used together with any other certified Z-Wave device regardless of brand and origin as long as both are suited for the same frequency range.
If a device supports secure communication it will communicate with other devices secure as long as this device provides the same or a higher level of security. Otherwise it will automatically turn into a lower level of security to maintain backward compatibility.
For more information about Z-Wave technology, devices, white papers etc. please refer to www.z-wave.info.
Set your lights to turn off automatically according to the time of day or turn them off from the comfort of your bed. With the TESLA Smart Switch and the Tesla Smart app, you can do it on your phone in a matter of seconds.
Control Anything Remotely.
Thanks to the smart app that"s always connected to the switch, you can turn anything on or off from anywhere. You don"t even have to be in the house and you"ll be still able to control these devices.
Unlimited Possibilities.
There are many options and it"s up to you which one you choose. The device connects to the app via Wi-Fi and then you can set up different scenarios.
Wi-Fi Connection.
The device comes with a Wi-Fi receiver. The receiver allows you to control your switch from anywhere using the TESLA Smart app.
Turning off the lights from your bed? No problem!
The TESLA Smart Switch is equipped with a Wi-Fi module so you can control the lights in your house from anywhere. All you need to do is pair it with the app, which is available for free in English language for both Android and iOS.
Create automatic scenarios.
In the app, you can simply preset the light intensity for certain times of the day, or times when the lights should go out. And you don"t have to worry about anything else. For instance, the patio light will automatically turn off or the air purifier will turn off in the evening along with the lights.
Fits into your smart home.
TESLA switch is compatible with both Google Assistant and Amazon Alexa.
Control your lighting with the TESLA switch.
You can choose from a standard one-button version or the two-button TESLA Smart Switch, where you can connect two circuits and control, for instance, the main light and the lighting above the kitchen counter separately. You simply replace the original switch with what you"re used to.
Features:
Please read the user manual before installing the product.
In order to include (add) a Z-Wave device to a network it must be in factory default state. Please make sure to reset the device into factory default. You can do this by performing an Exclusion operation as described below in the manual. Every Z-Wave controller is able to perform this operation however it is recommended to use the primary controller of the previous network to make sure the very device is excluded properly from this network.
ATTENTION: only authorized technicians under consideration of the country-specific installation guidelines/norms may do works with mains power. Prior to the assembly of the product, the voltage network has to be switched off and ensured against re-switching.
On factory default the device does not belong to any Z-Wave network. The device needs to be added to an existing wireless network to communicate with the devices of this network. This process is called Inclusion.
Devices can also be removed from a network. This process is called Exclusion. Both processes are initiated by the primary controller of the Z-Wave network. This controller is turned into exclusion respective inclusion mode. Inclusion and Exclusion is then performed doing a special manual action right on the device.
Here are a few hints for network installation if things dont work as expected.
Dimensions | 0.0860000x0.0860000x0.0375000 mm |
Weight | 106 gr |
EAN | 8596115815032 |
Frequency | XXfrequency |
Maximum transmission power | XXantenna |