TESLA Smart Home

TechToy Smart Bulb RGB 4.5W E14 Wi-Fi

SKU: TSLLLIG-E14


Quickstart

This is a Z-Wave Device for . To run this device please connect it to your mains power supply.



Important safety information

Please read this manual carefully. Failure to follow the recommendations in this manual may be dangerous or may violate the law. The manufacturer, importer, distributor and seller shall not be liable for any loss or damage resulting from failure to comply with the instructions in this manual or any other material. Use this equipment only for its intended purpose. Follow the disposal instructions. Do not dispose of electronic equipment or batteries in a fire or near open heat sources.

What is Z-Wave?

Z-Wave is the international wireless protocol for communication in the Smart Home. This device is suited for use in the region mentioned in the Quickstart section.

Z-Wave ensures a reliable communication by reconfirming every message (two-way communication) and every mains powered node can act as a repeater for other nodes (meshed network) in case the receiver is not in direct wireless range of the transmitter.

This device and every other certified Z-Wave device can be used together with any other certified Z-Wave device regardless of brand and origin as long as both are suited for the same frequency range.

If a device supports secure communication it will communicate with other devices secure as long as this device provides the same or a higher level of security. Otherwise it will automatically turn into a lower level of security to maintain backward compatibility.

For more information about Z-Wave technology, devices, white papers etc. please refer to www.z-wave.info.

Product Description

A smart bulb fits perfectly into your smart home. Whether you like the brightness of daylight or want to set a more relaxed atmosphere with dimmed lights, smart bulbs can adapt.

RGB Colours.
The smart bulb has an RGB colour range of 2,700 - 6,500K. This means you can always find the light you need.

Easy Application.
You can control the lights throughout your home from anywhere with your phone. And you can do it through the TESLA Smart app.

Energy Saving.
The smart bulb has an electrical input of 4.5 W and a luminous intensity of 350 lumens. These parameters suggest that this is an energy-efficient bulb. It is therefore more suitable for places that do not need to be directly illuminated by the brightest light.

Simplicity and comfort.
Now you won"t even have to get off the couch to control the lights. And if you forget to turn off the lights in the house when you leave, the app lets you fix it from anywhere. The TechToy Smart Bulb RGB 4.5W E14 bulbs are also energy efficient, so you don"t have to worry about the electricity bill.

Easy to use.
Just because it"s a smart bulb doesn"t mean you have to worry about complicated setup and operation. The bulb connects to other devices via Wi-Fi and Bluetooth. It"s very easy to connect the bulb to an app on your phone or tablet. From there, you can also control it easily. The app also allows you to control the lights from anywhere, as long as you have access to Wi-Fi or mobile data. It can also be linked to other products in your smart home. For example, when connected to sensors, the lights can automatically turn off when you leave and turn on when you arrive.

Lighting for every moment.
Lighting is a very important aspect of the home and affects how we feel at home.

The temperature setting is up to you.
The TechToy Smart Bulb RGB 4.5W E14 offers a colour temperature range of 2,700 K - 6,500 K RGB + CCT, which means you really have a lot to choose from. The E14 thread type bulb also has dimming capability and allows you to adjust the white color temperature.

Features:

Prepare for Installation / Reset

Please read the user manual before installing the product.

In order to include (add) a Z-Wave device to a network it must be in factory default state. Please make sure to reset the device into factory default. You can do this by performing an Exclusion operation as described below in the manual. Every Z-Wave controller is able to perform this operation however it is recommended to use the primary controller of the previous network to make sure the very device is excluded properly from this network.

Safety Warning for Mains Powered Devices

ATTENTION: only authorized technicians under consideration of the country-specific installation guidelines/norms may do works with mains power. Prior to the assembly of the product, the voltage network has to be switched off and ensured against re-switching.

Inclusion/Exclusion

On factory default the device does not belong to any Z-Wave network. The device needs to be added to an existing wireless network to communicate with the devices of this network. This process is called Inclusion.

Devices can also be removed from a network. This process is called Exclusion. Both processes are initiated by the primary controller of the Z-Wave network. This controller is turned into exclusion respective inclusion mode. Inclusion and Exclusion is then performed doing a special manual action right on the device.

Quick trouble shooting

Here are a few hints for network installation if things dont work as expected.

  1. Make sure a device is in factory reset state before including. In doubt exclude before include.
  2. If inclusion still fails, check if both devices use the same frequency.
  3. Remove all dead devices from associations. Otherwise you will see severe delays.
  4. Never use sleeping battery devices without a central controller.
  5. Dont poll FLIRS devices.
  6. Make sure to have enough mains powered device to benefit from the meshing

Technical Data

Dimensions 0.0370000x0.0370000x0.1060000 mm
Weight 28 gr
EAN 8596115842021
Frequency XXfrequency
Maximum transmission power XXantenna

Explanation of Z-Wave specific terms