TESLA Smart Home

TESLA Smart Home Smart Air Purifier Pro L Wi-Fi

SKU: TSLLAC-AP3006


Quickstart

This is a Z-Wave Device for . To run this device please connect it to your mains power supply.



Important safety information

Please read this manual carefully. Failure to follow the recommendations in this manual may be dangerous or may violate the law. The manufacturer, importer, distributor and seller shall not be liable for any loss or damage resulting from failure to comply with the instructions in this manual or any other material. Use this equipment only for its intended purpose. Follow the disposal instructions. Do not dispose of electronic equipment or batteries in a fire or near open heat sources.

What is Z-Wave?

Z-Wave is the international wireless protocol for communication in the Smart Home. This device is suited for use in the region mentioned in the Quickstart section.

Z-Wave ensures a reliable communication by reconfirming every message (two-way communication) and every mains powered node can act as a repeater for other nodes (meshed network) in case the receiver is not in direct wireless range of the transmitter.

This device and every other certified Z-Wave device can be used together with any other certified Z-Wave device regardless of brand and origin as long as both are suited for the same frequency range.

If a device supports secure communication it will communicate with other devices secure as long as this device provides the same or a higher level of security. Otherwise it will automatically turn into a lower level of security to maintain backward compatibility.

For more information about Z-Wave technology, devices, white papers etc. please refer to www.z-wave.info.

Product Description

Smart air purifier for medium to large rooms.
With its output, it cleans the air in rooms up to 40 m² in size. It removes odors from smoke, cooking and frying, and even eliminates viruses and bacteria. A useful helper, which you can easily control using an application for iOS and Android.

UV Light.
The use of a cold cathode ultraviolet lamp with a wavelength of 253.7 nm can effectively kill a variety of common bacteria, viruses and inhibit the reproduction and production of bacteria and viruses.

Ionization.
The negative ion generator produces a large number of negative ions, eliminates odors, has a strong absorption capability. The negative ion will make bacteria lose their activity and make them harmless. Negative ions also make the air feel fresh, just like after the rain.

Activated Carbon Filter.
The carbon filter is very effective in absorption of volatile organic compounds, including unpleasant smells and many kinds of polluting gases.

Photocatalyst Filter.
TiO2 in the photocatalyst filter has a strong photo-catalytic function under the UV light. It further degrades formaldehyde, toluene, xylene, TVOC, and other pollutants.

HEPA Filter.
HEPA is an acronym that stands for High-Efficiency Particulate Air. It can drastically reduce the spread of allergens and bacteria in airflow, such as pollen, smog, and viruses. The HEPA filter was originally developed for NASA, and it been widely used in hospitals, to keep the air clean and harmless.

Washable Pre-filter.
Uses micron mesh filter, effectively block 2.5mm fibrous particulate matter. It can be cleaned easily up to ten thousand times, preventing large particles such as pet fur, dander, and coarse dust, etc.

App TESLA Smart.
Easy control from anywhere provided by the mobile app. Makes life easier by setting up automations and connecting to the TESLA Smart product ecosystem.

Hassle-free control via the app.
All the functions of the air purifier can be conveniently controlled via a mobile app that is available in English language for both iOS and Android. It connects the air purifier to other products in the Tesla Smart ecosystem and sets up clever automations. Have you arrived home? The air purifier starts working immediately. Have you opened a window? It switches off. You can also turn on the timer or auto mode. Many different scenarios can be set up. Let smart products react for you, saving time and money. To be certain that everything is properly paired, make sure you have 2.4GHz Wi-Fi.

UV radiation eliminates formaldehydes and toluene.
Formaldehyde is contained in chipboard, carpets, clothing, cosmetics or toys and is released into the air. According to the World Health Organization, it can cause cancer. Fortunately, this purifier disposes of it thanks to a UV lamp and a titanium dioxide grid - and with it toluene, xylene or benzene.

You will have air like a storm.
Do you also like the refreshing air when it rains hard in the summer? With this cleaner, you can create it at home at any time. The purifier has an ionizer that releases healthy anions into the environment - so it does exactly what a storm does in nature.

The filters capture particles 100 times smaller than the hair.
The heart of the cleaner is the HEPA filter, which captures all hair, hair and microparticles such as dust or pollen. Just to give you an idea - the filter captures 99% of particles up to 0.3 micrometers in size, which is about 100 times less than the diameter of a human hair. Great especially for allergy sufferers and asthmatics.

TESLA Smart Air Purifier Pro L.
A set of quality filters captures even the smallest particles with a diameter of only 0.5 µm.

Accesories.
HEPA filter | Carbon filter | UV bulb

Features:

Prepare for Installation / Reset

Please read the user manual before installing the product.

In order to include (add) a Z-Wave device to a network it must be in factory default state. Please make sure to reset the device into factory default. You can do this by performing an Exclusion operation as described below in the manual. Every Z-Wave controller is able to perform this operation however it is recommended to use the primary controller of the previous network to make sure the very device is excluded properly from this network.

Safety Warning for Mains Powered Devices

ATTENTION: only authorized technicians under consideration of the country-specific installation guidelines/norms may do works with mains power. Prior to the assembly of the product, the voltage network has to be switched off and ensured against re-switching.

Inclusion/Exclusion

On factory default the device does not belong to any Z-Wave network. The device needs to be added to an existing wireless network to communicate with the devices of this network. This process is called Inclusion.

Devices can also be removed from a network. This process is called Exclusion. Both processes are initiated by the primary controller of the Z-Wave network. This controller is turned into exclusion respective inclusion mode. Inclusion and Exclusion is then performed doing a special manual action right on the device.

Quick trouble shooting

Here are a few hints for network installation if things dont work as expected.

  1. Make sure a device is in factory reset state before including. In doubt exclude before include.
  2. If inclusion still fails, check if both devices use the same frequency.
  3. Remove all dead devices from associations. Otherwise you will see severe delays.
  4. Never use sleeping battery devices without a central controller.
  5. Dont poll FLIRS devices.
  6. Make sure to have enough mains powered device to benefit from the meshing

Technical Data

Dimensions 0.4600000x0.6200000x0.2200000 mm
Weight 7000 gr
EAN 8596115823037
Frequency XXfrequency
Maximum transmission power XXantenna

Explanation of Z-Wave specific terms