Quickstart

This is a Z-Wave Device for XXXQFrequencyName. To run this device please connect it to your mains power supply.



Important safety information

Please read this manual carefully. Failure to follow the recommendations in this manual may be dangerous or may violate the law. The manufacturer, importer, distributor and seller shall not be liable for any loss or damage resulting from failure to comply with the instructions in this manual or any other material. Use this equipment only for its intended purpose. Follow the disposal instructions. Do not dispose of electronic equipment or batteries in a fire or near open heat sources.

Product Description

The efficient Tesvor X500 Pro Hybrid 2-in-1 Robot Vacuum and Mop is equipped with modern sensors and functions to manage your daily vacuuming and mopping tasks completely autonomously. The smart device cleans hard floors such as laminate, parquet and tiles, but also short-pile carpets.

The vacuuming and mopping robot can be controlled and scheduled manually or via the free app (iOS, Android) while you are away from home. The app offers you a wide range of functions and options to choose from. For example, you can monitor the cleaning processes, set a schedule or define the selection of the appropriate cleaning mode. In addition, you can control the device with your voice via Amazon Alexa or Google Assistant.

Thanks to the smart and innovative navigation, the Tesvor X500 Pro creates a room map in real-time. This allows it to plan its cleaning path and adapt to your rooms.

The Gyroscope SLAM navigation and the 3-level cleaning system ensure a careful and comprehensive cleaning. Dust and dirt particles are picked up by the rotating floor rollers and transported into the collection container by a powerful suction. This guarantees a complete and efficient cleaning. Due to the systematic driving method, the vacuuming and mopping robot works efficiently and saves time. The powerful battery allows up to 120 minutes of running time for a cleaning area up to 150 m². You can monitor the cleaning progress via the app.

The Tesvor X500 Pro climbs up to 15 mm high edges and steps. To use the suction function, the dust container needs to be mounted inside the device so that the vacuumed dust can be collected in it. You can easily remove the dust container, empty it and use it again.

In addition to the dust container, the Tesvor X500 Pro also comes with an electrically controllable water tank. The water tank needs to be filled with fresh water and then a microfibre cloth is attached. This makes it easy to remove dirt and grime from hard floors. The amount of water can be individually adjusted and controlled via the app. This means that the range varies accordingly. After mopping, you can remove the microfibre cloth, wash it out and use it again. Please note that the X500 Pro cannot climb over steps once the water tank is mounted!

The robot vacuum cleaner with wiping function is equipped with a variety of sensors such as anti-collision and fall prevention sensors. This allows the smart device to detect obstacles at an early stage and avoid them without bumping into them. In the case of stairs or steps, the robot vacuum reacts early and changes its direction of movement.

But that is not all. Thanks to the particularly low height of only 7.5 cm, the smart device can also clean under low furniture and in hard-to-reach areas. When cleaning is complete or the battery of the X500 Pro is low, the Tesvor X500 Pro moves to the charging station and charges automatically.

Thanks to OTA technology, you are always up-to-date. Via your W-LAN connection, new updates are simply transferred to the smart device by the manufacturer.

Features

  • Intelligent Gyroscope Navigation
  • Suction power: 1,800 PA
  • Wifi Contact: Yes
  • Double cleaning with V-brushes
  • Vacuum and Mop in One
  • Electronic water tank: 350 ml
  • Perfectly suitable for various floors and cleaning areas up to 150 m²
  • Fall protection
  • OTA technology
  • Edge and border cleaning in every corner
  • Multi-surface cleaning from hard floors to medium-high carpets
  • Automatic return to charging station
  • Charging time: 240 to 360 minutes
  • Maximum Runtime: Up to 120 minutes
  • Control via remote control, app (iOS, Android) or voice
  • Compatible with Amazon Alexa and Google Assistant
  • Battery: Li-ion battery (2,500 mAh)
  • Operating Noise: < 65 dB
  • Dust container capacity: 600 ml
  • Barrier-cross Height: 15mm
  • Virtual Wall: Magnetic Strip Tape
  • Filter: 3-fold HEPA filter technology
  • Scope of delivery: X500 PRO Robot Vacuum Cleaner, charging station, main brush, instructions, adapter, filter, remote control unit, water tank, cloth, 2x side brushes

Download high resolution images for Tesvor products.

Reset to factory default XXXResetDescription
Inclusion XXXInclusionDescription
Exclusion XXXExclusionDescription
NIF XXXNIF
Wakeup XXXWakeupDescription
Protection XXXProtection
FirmwareUpdate XXXFirmwareUpdate
SetAssociation XXXSetAssociation

Technical Data

Dimensions 0.3300000x0.0750000x0.3300000 mm
Weight 3500 gr
EAN 6973104880004
Frequency XXfrequency
Maximum transmission power XXantenna
Z-Wave Device