Seluxit
ViaSens 100
SKU: SEL_VIASENS100
Quickstart
This is a
Important safety information
Please read this manual carefully. Failure to follow the recommendations in this manual may be dangerous or may violate the law. The manufacturer, importer, distributor and seller shall not be liable for any loss or damage resulting from failure to comply with the instructions in this manual or any other material. Use this equipment only for its intended purpose. Follow the disposal instructions. Do not dispose of electronic equipment or batteries in a fire or near open heat sources.Product Description
ViaSens 100 connects a PC to a Z-Wave network using the USB interface. The unit emulates a USB communication device (CDC Communications Device Class) and does not need any further device drivers. The operating system and the Z-Wave capable home automation software recognise the device as virtual serial interface.
PC software communicates with the device via this serial port using the serial API-protocol of Z-Wave, which is described in the document “Z-Wave Application Programmers Guide, INS10247”. This standard protocol of Z-Wave is used by many home automation software solutions. All software solutions using the Zen-Sys standard library “zwave.dll” for Microsoft Windows are compatible with this adapter.
| Reset to factory default | XXXResetDescription |
| Inclusion | XXXInclusionDescription |
| Exclusion | XXXExclusionDescription |
| NIF | XXXNIF |
| Wakeup | XXXWakeupDescription |
| Protection | XXXProtection |
| FirmwareUpdate | XXXFirmwareUpdate |
| SetAssociation | XXXSetAssociation |
Technical Data
| Dimensions | 0.0060000x0.0060000x0.0030000 mm |
| Certification ID | ZC08-07110004 |
| Frequency | Europe - 868,4 Mhz |
| Maximum transmission power | 5 mW |