Sensibo

Sensibo Sky Smart AC Controller Storm Grey

SKU: SBOLSKY01-SG

Quickstart

This is a Z-Wave Device for . To run this device please connect it to your mains power supply.

Important safety information

Please read this manual carefully. Failure to follow the recommendations in this manual may be dangerous or may violate the law. The manufacturer, importer, distributor and seller shall not be liable for any loss or damage resulting from failure to comply with the instructions in this manual or any other material. Use this equipment only for its intended purpose. Follow the disposal instructions. Do not dispose of electronic equipment or batteries in a fire or near open heat sources.

What is Z-Wave?

Z-Wave is the international wireless protocol for communication in the Smart Home. This device is suited for use in the region mentioned in the Quickstart section.

Z-Wave ensures a reliable communication by reconfirming every message (two-way communication) and every mains powered node can act as a repeater for other nodes (meshed network) in case the receiver is not in direct wireless range of the transmitter.

This device and every other certified Z-Wave device can be used together with any other certified Z-Wave device regardless of brand and origin as long as both are suited for the same frequency range.

If a device supports secure communication it will communicate with other devices secure as long as this device provides the same or a higher level of security. Otherwise it will automatically turn into a lower level of security to maintain backward compatibility.

For more information about Z-Wave technology, devices, white papers etc. please refer to www.z-wave.info.

Product Description

Sensibo Sky is an innovative smart device that revolutionizes the way we interact with our air conditioning systems. With its advanced features and intuitive controls, Sensibo Sky takes your air conditioning experience to new heights. Let"s delve deeper into the capabilities and benefits of this remarkable device.

Remote Control.
With Sensibo Sky, you can take remote control works your air conditioner from anywhere using your smartphone. The Sensibo by phone app allows you to adjust temperature, change modes, set timers, and more, providing you with complete remote control over your cooling system.

Intelligent Algorithms.
Sensibo Sky employs intelligent algorithms to optimize the operation of your air conditioner. By analyzing factors such as temperature, humidity, occupancy, and weather conditions, Sensibo Sky ensures efficient and effective cooling while minimizing energy wastage.

Smart Scheduling.
Take advantage of the scheduling feature to program your air conditioner according to your daily routine. Set different temperature settings supports any air conditioner for specific times of the day, ensuring that your home is comfortable when you need it and conserving energy when you don"t.

Geolocation.
Sensibo Sky utilizes geolocation technology to detect and monitor your proximity to home. It can automatically adjust the unit to various temperature and humidity settings based on your location, ensuring a comfortable environment upon your arrival and energy savings when you"re away.

Energy Monitoring.
Gain insights into your air conditioner smart energy usage with Sensibo Sky"s energy monitoring feature. Track the energy consumption of your air conditioner and make informed decisions to optimize energy efficiency and reduce costs.

Sensibo Sky is compatible with a wide range of air conditioning systems, making it a versatile choice for homeowners. It works with popular brands and models, including split systems units, window units, and portable air conditioners units. Whether you have a new unit or existing air conditioner, Sensibo Sky can seamlessly integrate with your system to enhance its functionality.

Sensibo Sky is voice controled, designed to integrate seamlessly into your smart home ecosystem. It supports integration with popular voice assistants such as Google Assistant and Amazon Alexa. This integration allows you to control your air conditioner using voice commands, adding an extra level of convenience and hands-free remote operation to your daily life.

The Sensibo app, available for both iOS and Android devices, provides a user-friendly interface for controlling and monitoring your air conditioner. The app"s intuitive design allows for easy navigation and quick access to all the features and settings of the Sensibo Sky. Whether you"re a tech enthusiast or new to smart devices, the Sensibo app ensures a seamless and enjoyable user experience.

Easy Installation and Setup.
Sensibo Sky offers an array of advanced features and capabilities that elevate your air conditioning experience. Its compatibility, seamless integration, and user-friendly interface make it a smart choice for anyone seeking to enhance comfort, save energy, and gain more control over their cooling system. In the next section, we will explore the easy installation and setup process of Sensibo Sky.

Smart Temperature Control.
One of the standout features of Sensibo Sky is its intelligent temperature control capabilities. With the Sensibo app, you can set schedules, timers, and customized temperature preferences to ensure your home is always at the perfect temperature when you need it. Whether you want to cool your home before you arrive or ensure a comfortable sleep environment, Sensibo Sky offers precise control over your air conditioning system.

Energy Efficiency and Cost Savings.
Sensibo Sky goes beyond comfort; it also helps you save energy and reduce costs. Its intelligent algorithms analyze factors such as room occupancy, weather conditions, and usage patterns to optimize the operation of your air conditioner. By ensuring your air conditioner runs only when necessary and at the most efficient settings, Sensibo Sky helps minimize energy wastage, saves energy, and lower your utility bills.

Enhanced Comfort and Convenience.
Imagine walking into a perfectly cooled home on a hot summer day or effortlessly adjusting the temperature of your room from the comfort of your bed. Sensibo Sky brings these conveniences to life. Its ability to always monitor the temperature and adapt to changes in temperature and occupancy ensures optimal comfort at all times. Furthermore, Sensibo Sky integrates seamlessly with voice assistants, allowing you to take remote control of your air conditioner with simple voice commands, making it an indispensable part of your smart home ecosystem.

Smart Home Integration.
Sensibo Sky embraces the concept of a connected home by integrating with popular smart home platforms such as Google Assistant and Amazon Alexa. This compatibility with compatible and enables you to incorporate Sensibo Sky into your existing smart home ecosystem effortlessly. You can create custom routines, set up voice-activated commands, or even remote control of your air conditioner through other smart devices, adding another layer of convenience and control to your daily life.

Features:

Supported ACs & heat pumps: Any air conditioner or heat pump with a remote control. Including: minisplit, high mount, window AC, portable, central AC with a wireless remote control.
Sensors: High accuracy temperature & humidity sensor, Universal IR receiver
Connectivity: WiFi 802.11 b/g/n @ 2.4GHz, DHCP or static IP addressing, SSL encryption
Powering Method: 5V 1A micro USB adapter
Operating Voltage: 110-240V
Humidity Range: Range: 5% to 95% RH, Sensitivity: ±5% RH
Temperature Range: Operating: 0° to 55°C (32° to 130°F), Sensitivity: ±0.5°C (±1°F)
Dimensions (WxLxH): 3.23” x 2.17" x 0.67" (82mm x 55mm x 17mm)
Apps: iOS, Android, HTML5
Voice Assistants & Integrations: Google Home, Amazon Alexa, Apple Siri, SmartThings, IFTTT, API
Automation: Full control of AC from anywhere (including all modes, fan levels, swing, LED light, etc.), 7-day schedules & Timers, Climate React, Geo-fencing
Mounting options: Double sided tape (supplied), screw-hole
Open API: Yes
Colors: Storm Grey or Cloud White
What’s in the box: Sensibo Sky WiFi controller for air conditioners and heat pumps, Power adapter, Double-sided adhesive

Prepare for Installation / Reset

Please read the user manual before installing the product.

In order to include (add) a Z-Wave device to a network it must be in factory default state. Please make sure to reset the device into factory default. You can do this by performing an Exclusion operation as described below in the manual. Every Z-Wave controller is able to perform this operation however it is recommended to use the primary controller of the previous network to make sure the very device is excluded properly from this network.

Safety Warning for Mains Powered Devices

ATTENTION: only authorized technicians under consideration of the country-specific installation guidelines/norms may do works with mains power. Prior to the assembly of the product, the voltage network has to be switched off and ensured against re-switching.

Inclusion/Exclusion

On factory default the device does not belong to any Z-Wave network. The device needs to be added to an existing wireless network to communicate with the devices of this network. This process is called Inclusion.

Devices can also be removed from a network. This process is called Exclusion. Both processes are initiated by the primary controller of the Z-Wave network. This controller is turned into exclusion respective inclusion mode. Inclusion and Exclusion is then performed doing a special manual action right on the device.

Quick trouble shooting

Here are a few hints for network installation if things dont work as expected.

Make sure a device is in factory reset state before including. In doubt exclude before include.
If inclusion still fails, check if both devices use the same frequency.
Remove all dead devices from associations. Otherwise you will see severe delays.
Never use sleeping battery devices without a central controller.
Dont poll FLIRS devices.
Make sure to have enough mains powered device to benefit from the meshing

Technical Data

Dimensions	0.0570000x0.0820000x0.0210000 mm
Weight	39 gr
EAN	7290016037098
Frequency	XXfrequency
Maximum transmission power	XXantenna

Explanation of Z-Wave specific terms

Controller — is a Z-Wave device with capabilities to manage the network. Controllers are typically Gateways,Remote Controls or battery operated wall controllers.
Slave — is a Z-Wave device without capabilities to manage the network. Slaves can be sensors, actuators and even remote controls.
Primary Controller — is the central organizer of the network. It must be a controller. There can be only one primary controller in a Z-Wave network.
Inclusion — is the process of adding new Z-Wave devices into a network.
Exclusion — is the process of removing Z-Wave devices from the network.
Association — is a control relationship between a controlling device and a controlled device.
Wakeup Notification — is a special wireless message issued by a Z-Wave device to announces that is able to communicate.
Node Information Frame — is a special wireless message issued by a Z-Wave device to announce its capabilities and functions.