This is a
The ZXT-110 is a Z-Wave to air-conditioner (AC) IR Extender that works with any Z-Wave compliant gateway or portable controller by translating Z-Wave&rsquos Thermostat commands and configuration commands to AC IR control code. User can set the IR code from the built-in code library of ZXT-110. It also supports Z-Wave networks with multiple gateways and controllers. Like every Z-Wave accessory, user will need to include the ZXT-110 into his Z-Wave network using the primary controller. Then, user can use either the primary controller or secondary controller to configure and setup the ZXT-110 using Z-Wave&rsquos configuration command class. Once the configuration and setup is completed, controller can use Z-Wave&rsquos “Thermostat commands class” to control their IR-controlled air-conditioner using the ZXT-110. ZXT-110 also supports battery operation that makes it very convenience as user can place it in anywhere at home.
Technical Data
Reset to factory default | XXXResetDescription |
Inclusion | XXXInclusionDescription |
Exclusion | XXXExclusionDescription |
NIF | XXXNIF |
Wakeup | XXXWakeupDescription |
Protection | XXXProtection |
FirmwareUpdate | XXXFirmwareUpdate |
SetAssociation | XXXSetAssociation |
Dimensions | 0.0000000x0.0000000x0.0000000 mm |
Frequency | Europe - 868,4 Mhz |
Maximum transmission power | 5 mW |