Heatit (Thermo-Floor)

Heatit Pro Thermostat (Black Matt)

SKU: HEA_5430583


Quickstart

This is a Z-Wave Device for XXXQFrequencyName. To run this device please connect it to your mains power supply.



Important safety information

Please read this manual carefully. Failure to follow the recommendations in this manual may be dangerous or may violate the law. The manufacturer, importer, distributor and seller shall not be liable for any loss or damage resulting from failure to comply with the instructions in this manual or any other material. Use this equipment only for its intended purpose. Follow the disposal instructions. Do not dispose of electronic equipment or batteries in a fire or near open heat sources.

Product Description

Heatit Pro is an electronic thermostat developed for electric heating, water-based heating and cooling systems. The thermostat has a user-friendly interface that can be controlled via the buttons on the front of the thermostat.

Heatit Pro has 2 modes: heating and cooling. The thermostat fits into standard European junction boxes and can be used with most System55 frames. It has a sturdy metal frame for secure attachment to the junction box. 

This thermostat has a built-in room temperature sensor and two additional external temperature sensors can also be connected.

Heatit Pro offers the option of a weekly schedule and open window detection. This product also features ZeroX technology, which ensures that the relay switches to 0 V when it is switched on and off. This gives the thermostat a much longer service life.

The Heatit Pro rounds off its range of functions with active current measurement, which allows the user to see the power consumption in real time.

Features

  • Internal room sensor
  • Adjustable display brightness
  • Floor sensor
  • Single pole switch
  • Temperature limiter
  • Lock mode/child lock
  • Anti-freeze
  • Hysteresis 0.5C - 10C
  • Works with NO and NC actuators
  • Temperature calibration
  • Weekly schedule
  • ZeroX detection
  • Open window detection 
  • Active power metering
  • External room sensor (wired by cable)

Technical data:

  • Power supply: 230V 50Hz
  • Maximum switching load: 3600W
  • Operating temperature: 5 - 40°C
  • Humidity: 10 - 85%
  • Temperature accuracy: +/- 0.5°C
Reset to factory default XXXResetDescription
Inclusion XXXInclusionDescription
Exclusion XXXExclusionDescription
NIF XXXNIF
Wakeup XXXWakeupDescription
Protection XXXProtection
FirmwareUpdate XXXFirmwareUpdate
SetAssociation XXXSetAssociation

Technical Data

Dimensions 0.0830000x0.0830000x0.0530000 mm
Weight 197 gr
EAN 7071236019053
Frequency XXfrequency
Maximum transmission power XXantenna
Z-Wave Device