.png){kind=logo}
Qubino (Goap)
Relay Insert 1
SKU: GOA_ZMNHAA2
Quickstart
This is a
Important safety information
Please read this manual carefully. Failure to follow the recommendations in this manual may be dangerous or may violate the law. The manufacturer, importer, distributor and seller shall not be liable for any loss or damage resulting from failure to comply with the instructions in this manual or any other material. Use this equipment only for its intended purpose. Follow the disposal instructions. Do not dispose of electronic equipment or batteries in a fire or near open heat sources.Product Description
The ZMNHAA2 is used for switching On or Off electrical devices. The module can be controlled either through Z-Wave network or through a wall switch. The device can be mounted inside a “flush mounting box” and is hidden behind a traditional wall switch. Additional functionalities are the optional temperature sensor, the measuring of power consumption as well as the repeater-function to improve range und stability of your Z-Wave network.
| Reset to factory default | XXXResetDescription |
| Inclusion | XXXInclusionDescription |
| Exclusion | XXXExclusionDescription |
| NIF | XXXNIF |
| Wakeup | XXXWakeupDescription |
| Protection | XXXProtection |
| FirmwareUpdate | XXXFirmwareUpdate |
| SetAssociation | XXXSetAssociation |
Technical Data
| Dimensions | 0.0370000x0.0420000x0.0160000 mm |
| Weight | 28 gr |
| EAN | 3830062070010 |
| Frequency | Europe - 868,4 Mhz |
| Maximum transmission power | 5 mW |