frient

frient Electricity Meter Interface 2 LED (Zigbee)

SKU: FRIZEMIV2


Quickstart

This is a Z-Wave Device for XXXQFrequencyName. To run this device please connect it to your mains power supply.



Important safety information

Please read this manual carefully. Failure to follow the recommendations in this manual may be dangerous or may violate the law. The manufacturer, importer, distributor and seller shall not be liable for any loss or damage resulting from failure to comply with the instructions in this manual or any other material. Use this equipment only for its intended purpose. Follow the disposal instructions. Do not dispose of electronic equipment or batteries in a fire or near open heat sources.

Product Description

frient Electricity Meter Interface 2: Wireless meter readings, energy consumption monitoring, interface for electricity meters with LED pulses, Zigbee, works with Homey and SmartThings.

  1. Become energy-aware with remote meter readings from the Electricity Meter Interface 2.
  2. Track your energy consumption, identify peaks, reduce consumption, and save money.
  3. Help the environment: Move some of your consumption to off-peak periods.
  4. Easy installation: Mount this frient yourself on a meter that has an LED indicating power consumption.
  5. HUB REQUIRED: This Zigbee frient needs a hub to connect to your smart home. The Electricity Meter Interface 2 works with Homey and SmartThings. Not all features work with all hubs.
  6. Compatible with: Meters that have a blinking LED light with a standard output rate of 1000 pulses/kWh. Configurable pulse rate available with selected hubs.

Informing you about your energy consumption.
This frient is called an electricity meter interface – however, it lets you track whatever your meter with LED pulses is reading. The Electricity Meter Interface 2 really is a helpful little frient that lets you identify your peaks and start moving some of your consumption to off-peak periods – to help the grid, the environment, and your energy bill.

Working with meters with a blinking LED light.
This electricity meter interface works with meters that has an LED indicating power consumption and a standard output rate of 1000 pulses/kWh. However, configuration of the pulse rate is available with selected hubs.

Easy installation.
Mount the Electricity Meter Interface 2 on your meter and start getting remote meter readings via a compatible smart home hub. There’s no need for professional help to install it. You can do it by yourself.

Features:

  • Informing you about your energy consumption
  • Working with meters with LED indicating power consumption
  • Easy installation
  • Communication protocol: Zigbee
  • Battery: 2 x AA, exchangeable
  • Battery life: 2 years, updating every 5 seconds, at room temperature
  • IP class: IP22
  • Operation temperature -20 to +60°C

Download high resolution images for frient products.
Reset to factory default XXXResetDescription
Inclusion XXXInclusionDescription
Exclusion XXXExclusionDescription
NIF XXXNIF
Wakeup XXXWakeupDescription
Protection XXXProtection
FirmwareUpdate XXXFirmwareUpdate
SetAssociation XXXSetAssociation

Technical Data

Dimensions 0.0950000x0.0650000x0.0223000 mm
Weight 66 gr
EAN 5713594004273
Frequency XXfrequency
Maximum transmission power XXantenna
Z-Wave Device