This is a
The POPP Mold Detector protects your home against mold formation. The detector has a unique and elegant design which fits in every Smart Home. Because of his slim design the Mold Detector can be placed at any position, which needs to be supervised.
To protect your home against mold the detector meaures temperature and humidity of its environment. The Mold Detector notices specified combinations of temperature and humidity, which can lead to the formation of mold. If a specific range of humidity and temperature, which leads to mold formation, is reached the detector sends out a warning to your Z-Wave Smart Home gateway. With that you will always be informed about the danger of mold formation.
Thanks to the Mold Detector the damage on buildings and apartment through mold can be avoided. If the Mold Detector dectects any danger of mold, the air system can be started automatically, the autamtic window motor can be opened or the residents will be alluded via push message to air the rooms.
Specifications:
We would like to point out that this article is not a new product. The product has got the complete functionality and can be integrated into a Z-Wave Smart Home without restriction.
However, the product may have the following characteristics:
We offer to you a guarantee of one year. With a possible return you receive a credit note, there is no exchange of the product.
The picture may not correspond to the scope of delivery of the product.
If you are interested in a larger quantity of used products, please contact your sales representative.
Reset to factory default | XXXResetDescription |
Inclusion | XXXInclusionDescription |
Exclusion | XXXExclusionDescription |
NIF | XXXNIF |
Wakeup | XXXWakeupDescription |
Protection | XXXProtection |
FirmwareUpdate | XXXFirmwareUpdate |
SetAssociation | XXXSetAssociation |
Dimensions | 0.0180000x0.0200000x0.0700000 mm |
Weight | 12 gr |
Frequency | Europe - 868,4 Mhz |
Maximum transmission power | 5 mW |