This is a
The NodOn® Smart Plug (Type E) can be controlled via a Home Automation gateway Z-Wave compliant or directly via any other Z-Wave® controller such as the NodOn Soft Remote, the wall switch or the Octan Remote. In German (Schuko) or French (Type E) standard, the plug can be mounted in both side, head up or head down. Combined with its thin design, these 2 specificities allow an easy integration, without obstructing beside sockets on a power strip. Learning process with the controller takes only few seconds. A button allows to switch ON/OFF the Smart Plug locally. Combined with a Home Automation gateway, the plug can notify a main power outage
We would like to point out that this article is not a new product. The product has got the complete functionality and can be integrated into a Z-Wave Smart Home without restriction.
However, the product may have the following characteristics:
We offer to you a guarantee of 1 year. With a possible return you receive a credit note, there is no exchange of the product.
The picture may not correspond to the scope of delivery of the product.
If you are interested in a larger quantity of used products, please contact your sales representative.
Reset to factory default | XXXResetDescription |
Inclusion | XXXInclusionDescription |
Exclusion | XXXExclusionDescription |
NIF | XXXNIF |
Wakeup | XXXWakeupDescription |
Protection | XXXProtection |
FirmwareUpdate | XXXFirmwareUpdate |
SetAssociation | XXXSetAssociation |
Dimensions | 0.0360000x0.0510000x0.1040000 mm |
Weight | 137 gr |
Frequency | Europe - 868,4 Mhz |
Maximum transmission power | 5 mW |