Quickstart

This is a Z-Wave Device for XXXQFrequencyName. To run this device please connect it to your mains power supply.



Important safety information

Please read this manual carefully. Failure to follow the recommendations in this manual may be dangerous or may violate the law. The manufacturer, importer, distributor and seller shall not be liable for any loss or damage resulting from failure to comply with the instructions in this manual or any other material. Use this equipment only for its intended purpose. Follow the disposal instructions. Do not dispose of electronic equipment or batteries in a fire or near open heat sources.

Product Description

The Qubino 3-Phase Smart Meter can be used in many automation scenes which make your life more comfortable.

The Smart Meter is an extremely versatile and powerful instrument for measuring energy in a three-phase power network with up to 65A. A built-in microprocessor calculates the reactive energy, the power and the power factor with the measured signals. The Smart Meter is designed so that it can be mounted on a top-hat rail.

The Qubino Smart Meter can be used in residential, industrial and commercial facilities. It permanently measures the current and the actual voltage directly in a 3-phase three-phase network. It calculates the current and total power, the power factor PHI and reactive energy which is actually consumed. The control via Z-Wave allows separately available relays to be controlled as well as to evaluate the measurement results from the device.

Features:

  • Z-Wave Plus
  • Secure 2
  • EU frequency: 868.42 MHz
  • Package content: 1x Qubino 3-Phase Smart Meter

Main terminals (1I, L2I, L3I, NI, L1O, L2O, L3O, NO)

  • Contacts capacity: 2.5...16 (25) qmm
  • Connection screws: M5
  • Max torque: 3.5 Nm

Optional terminals (DI, DO)

  • Contact capacity: 1…2.5 qmm
  • Connection screws: M3
  • Max torque: 1.2 Nm

Measuring input

  • Type (connection): three phase (4u)
  • Reference current (Iref): 5 A
  • Maximum current (Imax): 65 A
  • Minimum current (Imin): 0.25 A
  • Starting current: 20 mA
  • Voltage (Un): 230 V (±15-20%)
  • Power consumption at Un: < 8 VA
  • Nominal frequency (fn): 50 and 60 Hz

 Accessories

We would like to point out that this article is not a new product. The product has got the complete functionality and can be integrated into a Z-Wave Smart Home without restriction.

However, the product may have the following characteristics:

  • broken seal,
  • damaged packaging,
  • no original packaging
  • missing accessories,
  • minimal signs of wear,
  • no current software version.

We offer to you a guarantee of 1 year. With a possible return you receive a credit note, there is no exchange of the product.

The picture may not correspond to the scope of delivery of the product.

If you are interested in a larger quantity of used products, please contact your sales representative.

Reset to factory default XXXResetDescription
Inclusion XXXInclusionDescription
Exclusion XXXExclusionDescription
NIF XXXNIF
Wakeup XXXWakeupDescription
Protection XXXProtection
FirmwareUpdate XXXFirmwareUpdate
SetAssociation XXXSetAssociation

Technical Data

Dimensions 0.0533500x0.0692200x0.0835000 mm
Weight 220.58 gr
Frequency Europe - 868,4 Mhz
Maximum transmission power 5 mW
EuropeZ-Wave Device