Quickstart

This is a Z-Wave Device for XXXQFrequencyName. To run this device please connect it to your mains power supply.



Important safety information

Please read this manual carefully. Failure to follow the recommendations in this manual may be dangerous or may violate the law. The manufacturer, importer, distributor and seller shall not be liable for any loss or damage resulting from failure to comply with the instructions in this manual or any other material. Use this equipment only for its intended purpose. Follow the disposal instructions. Do not dispose of electronic equipment or batteries in a fire or near open heat sources.

Product Description

The Qubino Heat & Cool Thermostat is a Module for your Fan-Coil System.The Thermostat is able to control 2- and 4-pipe Fan-Coil Systems. The Thermostat module can be connected with your existing Fan-Coil System. Thanks to the very small size of the module it can be mounted almost everywhere like in a wallbox. Besides the thermostat measures the temperature through a digital sensor.

The Thermostat from Qubino can be easily retrofitted. When the device is connected to your Fan-Coil System it can be switched with a wallswitch, binary sensor or over the Z-Wave technology. The thermostat can be connected with a Z-Wave gateway and then be time controlled or over a Smartphone. Besides the digital temperature sensor reports the temperature to the Z-Wave Gateway.

 The Qubino modules upgrade your common switches with Smart Home Z-Wave technology. Unmount your installed switches. Connect the Qubino module with your existing electrical installation. The mount the switch on the flush box again. Now you can connect your lamp, fan or heating with a Z-Wave gateway and automate them.

Features:

  • Heat & Cool Thermostat with integrated temperature sensor to built in the flush box
  • Heating system: 2 or 4 pipe Fan coil system
  • Controlling via Smartphone or time controlled
  • Measurement of temperature and energy consumption
  • Wireless technologie: Z-Wave Plus

We would like to point out that this article is not a new product. The product has got the complete functionality and can be integrated into a Z-Wave Smart Home without restriction.

However, the product may have the following characteristics:

  • broken seal,
  • damaged packaging,
  • no original packaging
  • missing accessories,
  • minimal signs of wear,
  • no current software version.

We offer to you a guarantee of 1 year. With a possible return you receive a credit note, there is no exchange of the product.

The picture may not correspond to the scope of delivery of the product.

If you are interested in a larger quantity of used products, please contact your sales representative.

Reset to factory default XXXResetDescription
Inclusion XXXInclusionDescription
Exclusion XXXExclusionDescription
NIF XXXNIF
Wakeup XXXWakeupDescription
Protection XXXProtection
FirmwareUpdate XXXFirmwareUpdate
SetAssociation XXXSetAssociation

Technical Data

Dimensions 0.0700000x0.0700000x0.0170000 mm
Weight 46.91 gr
Frequency Europe - 868,4 Mhz
Maximum transmission power 5 mW
EuropeZ-Wave Device