This is a
The FOXX door and window sensor provides information whether a door or window is open or closed. The product consists of a magnetic element and the main unit. One of the parts is mounted on the moving part of the window or of the door the other part is placed on the frame. The installation can be done with screws or double-sided tape.
The sensor is battery-operated. Batteries can be changed without unscrewing the device from the door or frame. The unit will give a visual warning on the device and sends a warning to the Z-Wave controller, when batteries need to be replaced. The unit offers a tampering control and sends an alarm message when tampered.
The sensor sends information to a Z-Wave controller or any other associated Z-Wave device (e.g. lighting, sirens). In case of direct control, all the controlled devices must be associated to the door window sensor directly.
Features:
We would like to point out that this article is not a new product. The product has got the complete functionality and can be integrated into a Z-Wave Smart Home without restriction.
However, the product may have the following characteristics:
We offer to you a guarantee of 1 year. With a possible return you receive a credit note, there is no exchange of the product.
The picture may not correspond to the scope of delivery of the product.
If you are interested in a larger quantity of used products, please contact your sales representative.
Reset to factory default | XXXResetDescription |
Inclusion | XXXInclusionDescription |
Exclusion | XXXExclusionDescription |
NIF | XXXNIF |
Wakeup | XXXWakeupDescription |
Protection | XXXProtection |
FirmwareUpdate | XXXFirmwareUpdate |
SetAssociation | XXXSetAssociation |
Dimensions | 0.0280000x0.0730000x0.0190000 mm |
Weight | 50 gr |
Frequency | Europe - 868,4 Mhz |
Maximum transmission power | 5 mW |