This is a
The Aeotec Door Window Sensor 7 (700 series) is a basic GEN7 sensor which detects if your window is opened or closed.
Thanks to its slim design, the Aeotec Door Window Sensor 7 can be inconspicuously on every window. The sensor just has to be installed on the window casement. Additionally, there has to be a slim magnet installed closely to the sensor at the window frame.
Should your Aeotec Door Window Sensor 7 (700 series) fail you once, the core - the circuit board - can be easily replaced without removing the sensor. This allows you to glue the device to the window frame and replace only the circuit board.
Features:
Download high resolution images for Aeotec products.
Reset to factory default | XXXResetDescription |
Inclusion | XXXInclusionDescription |
Exclusion | XXXExclusionDescription |
NIF | XXXNIF |
Wakeup | XXXWakeupDescription |
Protection | XXXProtection |
FirmwareUpdate | XXXFirmwareUpdate |
SetAssociation | XXXSetAssociation |
Dimensions | 0.0190000x0.0710000x0.0180000 mm |
Weight | 15 gr |
Frequency | Europe - 868,4 Mhz |
Maximum transmission power | 5 mW |