Aqara
Aqara LED Bulb T2 (CCT, E27) (Matter over Thread)
SKU: AQA_LB-L02E
Quickstart
This is a
Important safety information
Please read this manual carefully. Failure to follow the recommendations in this manual may be dangerous or may violate the law. The manufacturer, importer, distributor and seller shall not be liable for any loss or damage resulting from failure to comply with the instructions in this manual or any other material. Use this equipment only for its intended purpose. Follow the disposal instructions. Do not dispose of electronic equipment or batteries in a fire or near open heat sources.What is Z-Wave?
Z-Wave is the international wireless protocol for communication in the Smart Home. This device is suited for use in the region mentioned in the Quickstart section.
Z-Wave ensures a reliable communication by reconfirming every message (two-way communication) and every mains powered node can act as a repeater for other nodes (meshed network) in case the receiver is not in direct wireless range of the transmitter.
This device and every other certified Z-Wave device can be used together with any other certified Z-Wave device regardless of brand and origin as long as both are suited for the same frequency range.
If a device supports secure communication it will communicate with other devices secure as long as this device provides the same or a higher level of security. Otherwise it will automatically turn into a lower level of security to maintain backward compatibility.
For more information about Z-Wave technology, devices, white papers etc. please refer to www.z-wave.info.
Product Description
Dual Connectivity, Dynamic Brilliance.
Enhance your home lighting with the Aqara LED Bulb T2. Whether you"re looking for bright, high-quality white light for productivity or a calming range of colors to create the perfect atmosphere, this smart LED bulb has you covered. With ultra-low standby power consumption and effortless integration into your smart home setup, it’s both energy-efficient and reliable. Designed to last and adapt to your needs, the Aqara LED Bulb T2 is the perfect lighting solution to elevate every moment in your home.
- Important Notes: Traditional switches are not supported. The Aqara Bulb T2 is recommended for promoting smart automation scenarios. A hub is required to enable the key promotional features. For the Zigbee protocol, only the Aqara M (e.g., M2, M3, M1S Gen2) and E(e.g., E1) series hubs are currently supported. The Camera G3 Hub will begin supporting these features by late December, while the compatibility of the G2H Pro is yet to be determined.
- Thread/Zigbee Support: The LED Bulb T2 offers flexible dual-protocol support, easily switching between Zigbee and Thread to meet various needs. In Zigbee mode, users gain access to exclusive Aqara features and Matter compatibility through an Aqara hub. In Thread mode, the bulb connects directly to Matter-enabled ecosystems like Apple Home, Google Home, and Alexa, ensuring fast and reliable performance. Whether you prefer Aqara’s unique features or the broad compatibility of Thread, the T2 seamlessly integrates into any smart home setup.
- Wide Tunable Whites: Delivering powerful illumination with 1100lm, this LED bulb offers a wide color temperature range of 2700-6500K and a high color rendering index of Ra>90. Whether you"re looking for warm, cozy lighting or bright, crisp whites, this bulb transforms your space with the perfect light to match any mood or occasion.
- Circadian Lighting Syncs with Nature: It is also fully compatible with Apple HomeKit Adaptive Lighting, automatically adjusting its color temperature throughout the day. This feature ensures your lighting is always perfectly optimized for comfort and ambiance, seamlessly adapting to the natural changes in daylight.
- Power Off Memory Support: You’ll have complete control over whether the light automatically turns on or off after a power outage. This feature helps prevent unexpected lighting disturbances, like lights turning on suddenly in the middle of the night, ensuring your comfort and peace of mind.
- Automation with Aqara and Third-Party Devices: Enhance your smart lighting experience with this device"s powerful automation features in Aqara Home and third-party ecosystems. Easily create and trigger custom home scenes, allowing you to tailor your lighting to fit your unique lifestyle and preferences.
- Exclusive Features of Aqara Home: The Aqara LED Bulb T2 provides customizable transition settings and dimming controls, with precise curve adjustments for perfect illumination. It also supports both dynamic and static effects, which can be personalized to set the ideal ambiance. Fully compatible with Aqara switches, it ensures smooth, seamless control while eliminating common issues faced with traditional switches, enhancing both convenience and atmosphere in your smart home.
Features:
- Socket: E27
- Power supply 230V 50 Hz
- Power: 10,5W
- Colour Temperature: 2700K - 6500K
- Humidity: 0 - 95%
- Brightness: 1100 lm
- Wireless technology: Matter over Thread, Zigbee, Bluetooth
Prepare for Installation / Reset
Please read the user manual before installing the product.
In order to include (add) a Z-Wave device to a network it must be in factory default state. Please make sure to reset the device into factory default. You can do this by performing an Exclusion operation as described below in the manual. Every Z-Wave controller is able to perform this operation however it is recommended to use the primary controller of the previous network to make sure the very device is excluded properly from this network.
Safety Warning for Mains Powered Devices
ATTENTION: only authorized technicians under consideration of the country-specific installation guidelines/norms may do works with mains power. Prior to the assembly of the product, the voltage network has to be switched off and ensured against re-switching.
Inclusion/Exclusion
On factory default the device does not belong to any Z-Wave network. The device needs to be added to an existing wireless network to communicate with the devices of this network. This process is called Inclusion.
Devices can also be removed from a network. This process is called Exclusion. Both processes are initiated by the primary controller of the Z-Wave network. This controller is turned into exclusion respective inclusion mode. Inclusion and Exclusion is then performed doing a special manual action right on the device.
Quick trouble shooting
Here are a few hints for network installation if things dont work as expected.
- Make sure a device is in factory reset state before including. In doubt exclude before include.
- If inclusion still fails, check if both devices use the same frequency.
- Remove all dead devices from associations. Otherwise you will see severe delays.
- Never use sleeping battery devices without a central controller.
- Dont poll FLIRS devices.
- Make sure to have enough mains powered device to benefit from the meshing
Technical Data
| EAN | 6975833357086 |
| Frequency | XXfrequency |
| Maximum transmission power | XXantenna |
Explanation of Z-Wave specific terms
- Controller — is a Z-Wave device with capabilities to manage the network. Controllers are typically Gateways,Remote Controls or battery operated wall controllers.
- Slave — is a Z-Wave device without capabilities to manage the network. Slaves can be sensors, actuators and even remote controls.
- Primary Controller — is the central organizer of the network. It must be a controller. There can be only one primary controller in a Z-Wave network.
- Inclusion — is the process of adding new Z-Wave devices into a network.
- Exclusion — is the process of removing Z-Wave devices from the network.
- Association — is a control relationship between a controlling device and a controlled device.
- Wakeup Notification — is a special wireless message issued by a Z-Wave device to announces that is able to communicate.
- Node Information Frame — is a special wireless message issued by a Z-Wave device to announce its capabilities and functions.