Aqara

Aqara Single Switch Module T1 With Neutral (Zigbee)

SKU: AQAZSSM-U01


Quickstart

This is a Z-Wave Device for XXXQFrequencyName. To run this device please connect it to your mains power supply.



Important safety information

Please read this manual carefully. Failure to follow the recommendations in this manual may be dangerous or may violate the law. The manufacturer, importer, distributor and seller shall not be liable for any loss or damage resulting from failure to comply with the instructions in this manual or any other material. Use this equipment only for its intended purpose. Follow the disposal instructions. Do not dispose of electronic equipment or batteries in a fire or near open heat sources.

Product Description

Aqara Single Switch Modul T1  is a relay control module based on Zigbee 3.0 wireless communication protocol, which can control the power on/off of lights, fans and other devices. APP remote control, time control, power detection, power statistics and other functions can be realized with the gateway, and it can be combined with other smart devices to implement more intelligent scenarios.

A compatible Zigbee 3.0 hub is required for this device.
A special hub is required for shared use with HomeKit.

Freatures:

  • Input power: 100-250VAC,50/60Hz
  • Input current: MAX 10A (resistive load)
  • Rated load: Min. 3W, Max. 2500W (resistive load)
  • Wireless connection: Zigbee 3.0
  • Effective range: up to 30m (indoors)
  • Operating temperature: 0°C~ 35°C
  • Operating humidity: 5% ~ 95% RH, non-condensing
  • Storage temperature: -10°C~ 50°C
Reset to factory default XXXResetDescription
Inclusion XXXInclusionDescription
Exclusion XXXExclusionDescription
NIF XXXNIF
Wakeup XXXWakeupDescription
Protection XXXProtection
FirmwareUpdate XXXFirmwareUpdate
SetAssociation XXXSetAssociation

Technical Data

Dimensions 0.0430000x0.0400000x0.0200000 mm
Weight 30 gr
EAN 6970504213296
Frequency XXfrequency
Maximum transmission power XXantenna
Z-Wave Device