Shelly (Allterco Robotics LTD)
Shelly RC Snubber
SKU: ALR_RC_SNUBBER
Quickstart
This is a
Important safety information
Please read this manual carefully. Failure to follow the recommendations in this manual may be dangerous or may violate the law. The manufacturer, importer, distributor and seller shall not be liable for any loss or damage resulting from failure to comply with the instructions in this manual or any other material. Use this equipment only for its intended purpose. Follow the disposal instructions. Do not dispose of electronic equipment or batteries in a fire or near open heat sources.Product Description
The Shelly RC Snubber, is required for the installation of inductive loads (LED light drivers, transformers, fans, refrigerators, air conditioners), on Shelly Relays. It is installed in parallel with the inductive load.
| Reset to factory default | XXXResetDescription |
| Inclusion | XXXInclusionDescription |
| Exclusion | XXXExclusionDescription |
| NIF | XXXNIF |
| Wakeup | XXXWakeupDescription |
| Protection | XXXProtection |
| FirmwareUpdate | XXXFirmwareUpdate |
| SetAssociation | XXXSetAssociation |
Technical Data
| Dimensions | 0.0260000x0.1400000x0.0090000 mm |
| EAN | 3800235266144 |
| Frequency | XXfrequency |
| Maximum transmission power | XXantenna |