Shelly (Allterco Robotics LTD)

Shelly Motion Sensor 2

SKU: ALRLSHELLYMS2

Quickstart

This is a Z-Wave Device for . To run this device please connect it to your mains power supply.

Important safety information

Please read this manual carefully. Failure to follow the recommendations in this manual may be dangerous or may violate the law. The manufacturer, importer, distributor and seller shall not be liable for any loss or damage resulting from failure to comply with the instructions in this manual or any other material. Use this equipment only for its intended purpose. Follow the disposal instructions. Do not dispose of electronic equipment or batteries in a fire or near open heat sources.

What is Z-Wave?

Z-Wave is the international wireless protocol for communication in the Smart Home. This device is suited for use in the region mentioned in the Quickstart section.

Z-Wave ensures a reliable communication by reconfirming every message (two-way communication) and every mains powered node can act as a repeater for other nodes (meshed network) in case the receiver is not in direct wireless range of the transmitter.

This device and every other certified Z-Wave device can be used together with any other certified Z-Wave device regardless of brand and origin as long as both are suited for the same frequency range.

If a device supports secure communication it will communicate with other devices secure as long as this device provides the same or a higher level of security. Otherwise it will automatically turn into a lower level of security to maintain backward compatibility.

For more information about Z-Wave technology, devices, white papers etc. please refer to www.z-wave.info.

Product Description

Improved design.
Shelly Motion 2 will compliment every home interior with sleek contemporary design and tiny dimensions. The flexible yet secure holder will allow you to adjust the position of the sensor according to your preferences. And if you don’t want to mount it on your wall? Don’t worry! Shelly Motion2 can stand independently and be moved anywhere you want.

Ultra long battery life.
Shelly Motion 2 has a 6500 mAh rechargeable battery with a type- C charger. The life of the battery depends entirely on the usage. Installed in a space with regular motion activity – such as the family living room or kitchen – the battery life will be over 1 year. However, in Stand-by mode, the sensor’s battery life can go up to 3 years.

Blink of an eye fast response.
Shelly Motion 2 detects motion in less than 200 milliseconds – as fast as a blink of an eye! And immediately triggers an action such as turning on the lights.

Compatible with other devices.
Shelly Motion 2 can trigger other smart devices in your home network and customize the actions based on hour, light, or various actions.

256 levels of sensitivity.
256 levels of sensitivity will allow you to adjust incredibly precisely the distance and the movement to which the sensor reacts. Easily adjust the sensitivity levels through the app wherever you are.

Extended range and improved performance.
Shelly Motion 2 can catch motion up to 9 meters away and cover up to 120 degrees angle.

Tamper detection.
Install Shelly Motion 2, and rest assured that it will immediately inform you if someone touches the device or tries to dislocate or move it from its initial position.

No hub required.
Shelly Motion 2 can be controlled directly and without a hub through your smartphone with Shelly Cloud App. Manage and control the heating in your home, set quick profiles, scenes, schedules, and adjust settings wherever you are through the Cloud access, or only on the local network!

Supported platforms.
Use devices with your one local or centralized server - you can keep them fully isolated from public Internet network. Shelly Motion2 is compatible with Amazon Alexa, Home Assistant, Smart Things and other 3rd party home automation platforms. Shelly Plus devices can also be grouped with all Shelly devices, as well as other smart home devices on the home network.

Allow Shelly Motion 2 to assist you in your daily routine. Combine it with other Shelly devices like Shelly Plus 2PM, Shelly Plus 1 and Shelly Dimmer 2 to support your daily routine.

07.00h. The perfect morning routine. The moment you raise your head from the pillow, Shelly Motion 2 will trigger the automated blinds in your bedroom to open, allowing you to welcome the morning sunshine!

09.00h. No light energy wasted. When you leave for work in the morning, Shelly Motion 2 will ensure that all lights switch off once the house is empty and no motion is detected, ensuring that no energy will go to waste!

12.00h. Stay in touch with your home. Stay aware of the state of your home, no matter where you are! If motion or vibration is detected during the working hours of the day, Shelly Motion 2 will send you an immediate notification.

15.00h. Don’t let the heat inside. If the temperature in your home increases due to the afternoon heat waves in the summer, Shelly Motion 2 will shut down the blinds to prevent the heat from entering.

18.00h. Come home to a welcoming house. Stay aware of the state of your home, no matter where you are! If motion or vibration is detected during the working hours of the day, Shelly Motion 2 will send you an immediate notification.

20.00h. Light-sensitive outdoor lamps. Shelly Motion 2 light sensor allows dynamic adjustment of the brightness levels. With the natural light fading into the night, the outside lamps will increase the lighting levels to illuminate the space around the building.

23.30h. Smart scheduling for perfect lighting. Don’t wake up your family during your night-time snack! Use Shelly Motion 2 and Shelly Dimmer2 smart scheduling options to dimly on the lights at late hours. That way, it will not irritate your eyes or wake your loved ones.

Features:

Wi-Fi operated: Connect Shelly Motion 2 to your Wi-Fi-network. No HUB required!
Over 1 year battery life: Count on a long-lasting 6500 mAh rechargeable battery.
Light sensor: Highly sensitive light detection for actions based on the intensity of light.
Temperature sensor: Added temperature sensor for ultimate home automation experience.
Powerful CPU: Equipped with the lowest power-consuming Wi-Fi modem in mass production in the world.
Real time response: Response in less than 200 ms andimmediate action trigger to another device.
256 levels of sensitivity: Allows adjustment of the distance and the movement to which the sensor reacts.
Tamper detection: Receive notification in case someone is trying to dislocate it.
Bluetooth: Add devices quickly and easily via Bluetooth connection, using Shelly Cloud App.
No hub required: Control directly without a hub through your smartphone with Shelly Cloud App
Highly compatible: Use with your preferred home automation platforms and voice assistants.
Works with Aeotec Smart Home Hub, SmartThings and Homey
Compatible with Amazon Alexa and Google Home Assistant

Download high resolution images for Shelly products.

Prepare for Installation / Reset

Please read the user manual before installing the product.

In order to include (add) a Z-Wave device to a network it must be in factory default state. Please make sure to reset the device into factory default. You can do this by performing an Exclusion operation as described below in the manual. Every Z-Wave controller is able to perform this operation however it is recommended to use the primary controller of the previous network to make sure the very device is excluded properly from this network.

Safety Warning for Mains Powered Devices

ATTENTION: only authorized technicians under consideration of the country-specific installation guidelines/norms may do works with mains power. Prior to the assembly of the product, the voltage network has to be switched off and ensured against re-switching.

Inclusion/Exclusion

On factory default the device does not belong to any Z-Wave network. The device needs to be added to an existing wireless network to communicate with the devices of this network. This process is called Inclusion.

Devices can also be removed from a network. This process is called Exclusion. Both processes are initiated by the primary controller of the Z-Wave network. This controller is turned into exclusion respective inclusion mode. Inclusion and Exclusion is then performed doing a special manual action right on the device.

Quick trouble shooting

Here are a few hints for network installation if things dont work as expected.

Make sure a device is in factory reset state before including. In doubt exclude before include.
If inclusion still fails, check if both devices use the same frequency.
Remove all dead devices from associations. Otherwise you will see severe delays.
Never use sleeping battery devices without a central controller.
Dont poll FLIRS devices.
Make sure to have enough mains powered device to benefit from the meshing

Technical Data

Weight	122 gr
EAN	3800235262566
Frequency	XXfrequency
Maximum transmission power	XXantenna

Explanation of Z-Wave specific terms

Controller — is a Z-Wave device with capabilities to manage the network. Controllers are typically Gateways,Remote Controls or battery operated wall controllers.
Slave — is a Z-Wave device without capabilities to manage the network. Slaves can be sensors, actuators and even remote controls.
Primary Controller — is the central organizer of the network. It must be a controller. There can be only one primary controller in a Z-Wave network.
Inclusion — is the process of adding new Z-Wave devices into a network.
Exclusion — is the process of removing Z-Wave devices from the network.
Association — is a control relationship between a controlling device and a controlled device.
Wakeup Notification — is a special wireless message issued by a Z-Wave device to announces that is able to communicate.
Node Information Frame — is a special wireless message issued by a Z-Wave device to announce its capabilities and functions.