Shelly (Allterco Robotics LTD)

Shelly Plus H&T Gen. 3

SKU: ALRLSHELHTPSG3-W


Quickstart

This is a Z-Wave Device for . To run this device please connect it to your mains power supply.



Important safety information

Please read this manual carefully. Failure to follow the recommendations in this manual may be dangerous or may violate the law. The manufacturer, importer, distributor and seller shall not be liable for any loss or damage resulting from failure to comply with the instructions in this manual or any other material. Use this equipment only for its intended purpose. Follow the disposal instructions. Do not dispose of electronic equipment or batteries in a fire or near open heat sources.

What is Z-Wave?

Z-Wave is the international wireless protocol for communication in the Smart Home. This device is suited for use in the region mentioned in the Quickstart section.

Z-Wave ensures a reliable communication by reconfirming every message (two-way communication) and every mains powered node can act as a repeater for other nodes (meshed network) in case the receiver is not in direct wireless range of the transmitter.

This device and every other certified Z-Wave device can be used together with any other certified Z-Wave device regardless of brand and origin as long as both are suited for the same frequency range.

If a device supports secure communication it will communicate with other devices secure as long as this device provides the same or a higher level of security. Otherwise it will automatically turn into a lower level of security to maintain backward compatibility.

For more information about Z-Wave technology, devices, white papers etc. please refer to www.z-wave.info.

Product Description

Next- Generation Wi-Fi Temperature & Humidity sensor.
This sensor accurately tracks temperature and humidity, both essential for a healthy home environment. Connect it with other Shelly devices for seamless climate automation, ensuring optimal comfort and well-being in your living space.

No hub required! Easy control through the Shelly Smart Control app, as well as various protocols, platforms, and voice assistants
Equipped with the new Shelly chip: 8MB of memory and faster responsiveness
Matter-upgradable
Enhanced with a low a consuming e-paper display & built-in clock
Works with type-C USB slot (for faster connection)
Batteries 4 x 1.5 V AA (LR) batteries (not included)
Low battery consumption (Up to 1-year life of the batteries)
Wall mountable
Has an embedded web server and connects to your Wi-Fi network

WHY SHELLY H&T GEN3?
Revolutionary Performance.
Discover the power of enhanced memory with Shelly H&T Gen3. Equipped with our Shelly chip featuring 8MB of memory, it doubles the efficiency and responsiveness. The leap in memory capacity prepares Gen3 devices for upcoming features, and provides smoother operation and quicker responses, ensuring your environment is monitored with unparalleled precision and ease.

Now in More Matte Colors.
Experience the perfect blend of functionality and style with Shelly H&T Gen3, now available in three new colors. Whether you prefer a subtle touch or a bold statement, the Shelly H&T Gen3 adapts to your style, ensuring your home"s comfort and design are in perfect harmony. It"s not just about functionality; it"s about complementing your living space with a device that feels like it was made just for you.

Dual powered.
4 x Regular 1.5 V AA (LR) batteries
When used with batteries, Shelly H&T Gen3 has over one year of battery life thanks to its low energy-consuming display.
USB Power supply
Shelly H&T Gen3 is enhanced with a type-C USB slot, allowing for continuous power, faster connection and more frequent reports.
* The USB slot cannot be used to charge the device"s batteries.

Wi-Fi Operated.
Connect Shelly H&T Gen3 to your Wi-Fi network. No HUB required!

Bluetooth.
Quick inclusion via Bluetooth or use it as a Bluetooth gateway.

Measures humidity.
Monitor changes in humidity levels to avoid dryness and mold growth.

Measures temperature.
Be aware of temperature fluctuations and maintain comfortable conditions.

Free data history.
Features up to 1 year of free data storage for analysis and statistics.

Long Battery life.
Over 1 year of battery life and a USB type-C slot for continuous power.

USE CASES
The Ultimate Environment Monitor.
Ensure the perfect sleeping environment for your baby by monitoring the nursery"s temperature and humidity. Set alerts to maintain ideal conditions for ? safe and comfortable sleep.

Heating Made Easy: Shelly H&T"s Smart Climate Control.
Effortlessly transform your old heater into a smart one. By simply connecting your heater to a Shelly Plug, and then linking it with the Shelly H&T Gen3, you can create a scene that activates the heater just before the temperature drops. This smart automation ensures your home is always comfortably warm and efficient.

Intelligent Humidity Control.
Maintain a healthy environment in your bathroom with the Shelly H&T Gen3. By integrating the sensor with Shelly Plus 1 wired to your bathroom fan, you can automate humidity control with ease. Set a scene where, upon detecting high humidity levels, the Shelly Plus 1 activates the fan, effectively reducing moisture. This adds a touch of convenience to your daily routine, ensuring your bathroom remains comfortable and dry, automatically.

Gen3 Series features
On the Road to Matter.
Each Gen3 device is engineered to be upgradable to Matter. The doubled memory, compared to Plus series, guarantees a smooth update process, paving the way for new smart capabilities and integrations.
*Dependent on the extent of Matter"s functionalities support.

More Memory, More Power.
The Gen3 series ensures the quality and reliability of our devices by using our own powerful Shelly chip. Boasting 8MB of memory, this dramatically improves device performance and efficiency. This significant increase in memory not only guarantees smoother and faster operation but also equips the Gen3 series for the introduction of new capabilities. 

Unified Control with Virtual Components.
The Gen3 Series introduces “virtual components, transforming how you manage and control 3rd party devices. Within the Shelly Smart Control app, you can now create virtual devices, integrating non-Shelly products into a unified control system. This feature provides streamlined control of all your smart devices, regardless of brand, from a single interface.

Full compatibility.
Shelly devices are compatible with Alexa, Google Home, Android and iOS. Together with the voice assistant, you can command Shelly devices using just your voice! 

Shelly Smart Control.
One app to control your spaces, energy consumption, and expenses. 

Features:

Prepare for Installation / Reset

Please read the user manual before installing the product.

In order to include (add) a Z-Wave device to a network it must be in factory default state. Please make sure to reset the device into factory default. You can do this by performing an Exclusion operation as described below in the manual. Every Z-Wave controller is able to perform this operation however it is recommended to use the primary controller of the previous network to make sure the very device is excluded properly from this network.

Safety Warning for Mains Powered Devices

ATTENTION: only authorized technicians under consideration of the country-specific installation guidelines/norms may do works with mains power. Prior to the assembly of the product, the voltage network has to be switched off and ensured against re-switching.

Inclusion/Exclusion

On factory default the device does not belong to any Z-Wave network. The device needs to be added to an existing wireless network to communicate with the devices of this network. This process is called Inclusion.

Devices can also be removed from a network. This process is called Exclusion. Both processes are initiated by the primary controller of the Z-Wave network. This controller is turned into exclusion respective inclusion mode. Inclusion and Exclusion is then performed doing a special manual action right on the device.

Quick trouble shooting

Here are a few hints for network installation if things dont work as expected.

  1. Make sure a device is in factory reset state before including. In doubt exclude before include.
  2. If inclusion still fails, check if both devices use the same frequency.
  3. Remove all dead devices from associations. Otherwise you will see severe delays.
  4. Never use sleeping battery devices without a central controller.
  5. Dont poll FLIRS devices.
  6. Make sure to have enough mains powered device to benefit from the meshing

Technical Data

Dimensions 0.0700000x0.0700000x0.0250000 mm
Weight 47 gr
EAN 3800235261538
Frequency XXfrequency
Maximum transmission power XXantenna

Explanation of Z-Wave specific terms