Aeotec

Aeotec Button

SKU: AEOEZW166


Quickstart

This is a Z-Wave Device for XXXQFrequencyName. To run this device please connect it to your mains power supply.



Important safety information

Please read this manual carefully. Failure to follow the recommendations in this manual may be dangerous or may violate the law. The manufacturer, importer, distributor and seller shall not be liable for any loss or damage resulting from failure to comply with the instructions in this manual or any other material. Use this equipment only for its intended purpose. Follow the disposal instructions. Do not dispose of electronic equipment or batteries in a fire or near open heat sources.

Product Description

With the Aeotec Button you complete your bell system. The Button triggers your Aeotec Doorbell 6 or Siren 6 to ring by sending a 433MHz signal. You can link up to three buttons to a Doorbell to cover different home entrances. 

Due to the battery operation, which is very long-lasting with approx. 2 years, the installation is very easy with two small screws or even double-sided adhesive tape at any place (up to 90m away from the Aeotec Doorbell 6/Siren 6). 

Features:

  • Action button for Aeotec Doorbell 6 and Siren 6
  • Simple installation with adhesive tape
  • Battery operated
  • Up to 2 years battery life
  • Can be mounted up to 90m away from Doorbell 6 or Siren 6
  • 3 Buttons per Doorbell 6 or Siren 6
  • Wireless technology: 433MHz

Download high resolution images for Aeotec products.
Reset to factory default XXXResetDescription
Inclusion XXXInclusionDescription
Exclusion XXXExclusionDescription
NIF XXXNIF
Wakeup XXXWakeupDescription
Protection XXXProtection
FirmwareUpdate XXXFirmwareUpdate
SetAssociation XXXSetAssociation

Technical Data

Dimensions 0.0380000x0.0850000x0.0150000 mm
Weight 31 gr
EAN 1220000015999
Frequency XXfrequency
Maximum transmission power XXantenna
Z-Wave Device