Dies ist ein
Quick press the outside set button in 1.5 seconds to trigger product inclusion
Z-Wave ist der internationale Funkstandard zur Kommunikation von Geräten im intelligenten Haus. Dies ist ein Z-Wave Gerät und nutzt die im Quickstart angegebene Funkfrequenz.
Z-Wave ermöglicht eine sichere und stabile Kommunikation indem jede Nachricht vom Empfänger rückbestätigt wird (Zweiwege-Kommunikation) und alle netzbetriebenen Geräte Nachrichten weiterleiten (Routing) können, wenn eine direkte Funkbeziehung zwischen Sender und Empfänger gestört ist.Dank Z-Wave können Produkte unterschiedlicher Hersteller miteinander in einem Funknetz verwendet werden. Damit ist auch dieses Produkt mit beliebigen anderen Produkten anderer Hersteller in einem gemeinsamen Z-Wave Funknetz einsetzbar.
Wenn ein Gerät die spezielle sichere Kommunikation unterstützt dann wird es immer dann mit einem anderen Gerät sicher kommunizieren, wenn dieses Gerät auch eine sichere Kommunikation unterstützt. Ansonsten wird aus Kompatibilitätsgründen auf einen normalen Kommunikation umgeschaltet.
Weitere Informationen wie Produktneugkeiten, Tutorials, Supportforen etc. erhalten Sie auf www.zwave.de.
DOOYA Z-Wave curtain motor is designed with exceeding commercial standards, with its exceptional quietness and user-friendly setup. Multiple control options enable the users to operate the curtain by remote, APP, or with hands. Pull to move function would be especially helpful and convenient to users who are not yet familiar with motorization. Durability in use guarantee a 10,000 times use. Additionally, the motor is more than what were mentioned above. 1. Quick set limits: the motor would set its limit positions automatically with a full ride opening and closing on the track. 2. Soft start & soft stop: A smooth running with a soft start and soft stop provide a premium visual effect. 3. Pull to move: Just do what you always did on a normal curtain, but you do not have to pull the fabric all the way to the end. Just one touch of pulling on the fabric, the motor will start running until it reaches its end. 4. If the power was gone, you can still operate the curtain as a normal curtain. When the power is back, all the settings are still there. 5. RF compatibility: Dooya Z-Wave curtain motor is also compatible with the whole range of Dooya RF remotes, various choices and a different combination would satisfy all kinds of different needs.
Bitte lesen Sie die Benutzeranleitung bevor Sie das Gerät in Betrieb nehmen.
Damit ein Z-Wave zu einem neuen Netz hinzugefügt werden kann muss es sich im Auslieferungs- oder Reset-Zustand befinden. Im Zweifel ist es sinnvoll, eine Exklusion durchzuführen, um das Gerät ganz sicher in diesem Zustand zu bringen. Diese Exklusion kann von jedem beliebigen Z-Wave Controller durchgeführt werden.
Dieses Gerät kann auch ohne Hilfe eines Controller in den Reset-Zustand zurückgeführt werden. Dies sollte jedoch nur dann gemacht werden wenn der Primärcontroller des Z-Wave-Netzes nicht mehr verfügbar oder defekt ist.
Long press the outside set button for 15 seconds. (Please use this procedure only when the network primary controller is missing or otherwise inoperable.)
Achtung: Je nach nationalen Sicherheitsnormen kann es nur autorisierten und/oder ausgebildeten Techniker erlaubt sein, elektrische Installationen am Spannungsnetz vorzunehmen. Bitte informieren Sie sich vor der Installation über die Rechtslage.
Im Auslieferungszustand ist das Gerät mit keinem Z-Wave-Netz verbunden. Damit es
mit anderen Z-Wave Geräten kommunizieren kann, muss es in ein bestehendes Z-Wave Netz
eingebunden werden. Dieser Prozess wird bei Z-Wave Inklusion genannt. Geräte können
Netzwerke auch wieder verlassen. Dieser Prozess heißt bei Z-Wave Exklusion. Beide
Prozesse werden von einem Controller gestartet, der dazu in einen Inklusion- bzw.
Exklusion-Modus geschaltet werden muss. Das Handbuch des Controllers enthält
Informationen, wie er in diese Modi zu schalten ist. Erst wenn der Controller
des Z-Wave Netzes im Inclusion-Modus ist, können Geräte hinzugefügt werden.
Das Verlassen des Netzes durch Exklusion führt zum Rücksetzen dieses Gerätes
in den Auslieferungszustand.3>
Inklusion
Quick press the outside set button in 1.5 seconds to trigger product inclusion
Exklusion
Quick press the outside set button in 1.5 seconds to trigger product exclusion
Die folgenden kleinen Hinweise können bei Problemen im Z-Wave Netz helfen.
Z-Wave Geräte können andere Geräte direkt steuern. Diese direkte Steuerung heißt in Z-Wave Assoziation. In den steuernden Geräten muss dazu die Geräte-ID des zu steuernden Gerätes hinterlegt werden. Dies erfolgt in sogenannten Assoziationsgruppen. Eine Assoziationsgruppe ist immer an ein Ereignis im steuernden Gerät gebunden (Tastendruck oder Auslösen eines Sensors). Bei Eintritt dieses Ereignisses wird an alle in einer Assoziationsgruppe hinterlegten Geräte ein Steuerkommando - meist ein BASIC SET - gesendet.
Gruppen-Nummer | Max. Anzahl Geräte | Beschreibung |
---|---|---|
1 | 5 | GROUP 1 is lifeline service that assigned to curtain motor position. It enables the curtain motor to send reports to Z-Wave Controller or Z-Wave Gateway whenever the motor is starting or stopping. The Group Support: SWITCH_MULTILEVEL_REPORT_V3 DEVICE_RESET_LOCALLY_NOTIFICATION |
2 | 5 | GROUP 2 allows for Send Multilevel Report to associated devices in this group.This Group Support: SWITCH_MULTILEVEL_REPORT_V3 |
Z-Wave Produkte können direkt nach der Inklusion im Netz verwendet werden. Durch Konfigurationseinstellungen kann das Verhalten des Gerätes jedoch noch besser an die Anforderungen der Anwendung angepasst und zusätzliche Funktionen aktiviert werden.
WICHTIG: Manche Steuerungen erlauben nur die Konfiguration von vorzeichenbehafteten Werten zwischen -128 und 127. Um erforderliche Werte zwischen 128 und 255 zu programmieren, muss der gewünschte Wert minus 256 eingegeben werden. Beispiel: um einen Parameter auf einen Wert von 200 zu setzen, müsste der Wert 200-256 = -56 eingegeben werden, wenn nur positive Werte bis 128 akzeptiert werden. Bei Werten von 2 Byte Länge wird die gleiche Logik angewandt: Werte über 32768 werden als negative Werte angegeben.
Set the direction: This parameter can be used to set the motor rotation direction, the motor direction is forward (Configuration Value set to 0) or the opposite direction(Configuration Value set to 1), The default value is 0. Grösse: 1 Byte, Voreingestellt: 0
Wert | Beschreibung |
---|---|
0 | the motor direction is forward |
1 | the motor direction is opposite |
Delete the limit: This command can delete the limit that has been set for the motor. Grösse: 1 Byte, Voreingestellt: 127
Wert | Beschreibung |
---|---|
127 | Delete the limit position |
Set to start holding hands: This parameter can be used to set the motor open hand start function(Configuration Value set to 0) or closed(Configuration Value set to 1), The default value is 0. Grösse: 1 Byte, Voreingestellt: 0
Wert | Beschreibung |
---|---|
0 | open hand start function |
1 | close hand start function |
Configure weak electric switch mode: This parameter can be used to set the need for weak electric switch mode. Provide 4 kinds of weak electric switch mode is optional,respectively:Double-button reboundable switch(Configuration Value set to 1),Double-button not reboundable switch(Configuration Value set to 2),DC246 switch(Configuration Value set to 3),Single-button cyclic switch mode(Configuration Value set to 4),The default value is 1. Grösse: 1 Byte, Voreingestellt: 1
Wert | Beschreibung |
---|---|
1 | Double-button reboundable switch |
2 | Double-button not reboundable switch |
3 | DC246 switch |
4 | Single-button cyclic switch mode |
Configure strong electric switch mode:This parameter can be used to set the need of strong electric switch mode. Provide 3 kinds of weak electric switch mode is optional,respectively:Double-button not reboundable(Configuration Value set to 0) ,Hotel mode(Configuration Value set to 1),Double-button reboundable mode(Configuration Value set to 2),The default value is 0. Grösse: 1 Byte, Voreingestellt: 0
Wert | Beschreibung |
---|---|
0 | Double-button not reboundable |
1 | Hotel mode |
2 | Double-button reboundable mode |
Read whether the total limit is set:This parameter can be used to read the motor's total limit is already set.Not set the limit(Read into the Configuration Value is 0);Already set the limit(Read into the Configuration Value is 1) Grösse: 1 Byte, Voreingestellt: 0
Wert | Beschreibung |
---|---|
0 | Limit position does not set |
1 | Limit position has been set |
Read the device type: This parameter can be used to read the type of the motor.Motor types are divided into curtain motor(Read into the Configuration Value is 0x01), shutter(Read into the Configuration Value is 0x11), Venetian blinds (Read into the Configuration Value is 0x12) Grösse: 1 Byte, Voreingestellt: 1
Wert | Beschreibung |
---|---|
1 | curtain |
17 | shutter |
18 | venetian |
Read the motor power supply type:This parameter can be used to read the motor power supply type.The power of motor is classified into:Mains power supply(Read into the Configuration Value is 0),battery power(Read into the Configuration Value is 1). Grösse: 1 Byte, Voreingestellt: 0
Wert | Beschreibung |
---|---|
0 | Main power (AC power) |
1 | Bettery |
Manually set/cancel open borders: Manually set the open boundary of the curtain(Configuration Value set to 1), cancel manually open the border of the curtain(Configuration Value set to 0) Grösse: 1 Byte, Voreingestellt: 0
Wert | Beschreibung |
---|---|
0 | Cancel manually open the border of the curtain |
1 | Manually set the open boundary of the curtain |
Manually set /cancel close borders: Manually set the closed boundary of the curtain(Configuration Value set to 1), cancel manually close the border of the curtain(Configuration Value set to 0). Grösse: 1 Byte, Voreingestellt: 0
Wert | Beschreibung |
---|---|
0 | Cancel manually close the border of the curtain |
1 | Manually set the closed boundary of the curtain |
Z-Wave Hardware Platform | ZM5202 |
Gerätetyp | Window Covering - Pos/End Aware |
Netzwerkfunktion | Always On Slave |
Firmware Version | HW: 144 FW: 1.14:01.04 |
Z-Wave Version | 6.71.01 |
Zertifizierungs-ID | ZC10-18056102 |
Z-Wave Produkt Id | 0x030A.0x0103.0x0090 |
Window Covering Control Features | Automatic Calibration |
Security V2 | S2_UNAUTHENTICATED |
Frequenz | XXfrequency |
Maximale Sendeleistung | XXantenna |