Aqara

Aqara Curtain Driver E1 (Rod Version)

SKU: AQAZCM-M01_ROD


Quickstart

This is a Z-Wave Device for XXXQFrequencyName. To run this device please connect it to your mains power supply.



Important safety information

Please read this manual carefully. Failure to follow the recommendations in this manual may be dangerous or may violate the law. The manufacturer, importer, distributor and seller shall not be liable for any loss or damage resulting from failure to comply with the instructions in this manual or any other material. Use this equipment only for its intended purpose. Follow the disposal instructions. Do not dispose of electronic equipment or batteries in a fire or near open heat sources.

Product Description

The Curtain Driver comes in two versions, this rod version supports all types (extendable rods are not supported),.

Up to 1 year battery life between each charge.
You can choose from the huge 6400 mAh rechargeable battery, which can be used for up to a year or even powered continuously via the USB-C port. Actual battery life may vary depending on curtain weight, track length and friction.

Built-in light sensor.
Built-in light sensor allows Curtain Driver to control brightness: save energy on cooling and provide more comfort for your eyes.

Zigbee 3.0 protocol.
Zigbee, the most stable and reliable smart home technology, is used for store support automations and cloud integrations.

Easy installation and setup.
Simply mount the Curtain Driver E1 to the existing track and complete the installation in the Aqara Home app.

Broad ecosystem support.
Compatible with a wide range of ecosystems and voice assistants. HomeKit, Alexa, Google Assistant, IFTTT and the upcoming Matter are supported.

Maximum load of 12 kg.
The powerful motor allows the Curtain Driver E1 to push and pull a maximum of 12 kg, which is likely to support curtains made of all materials.

Features:

  • Radio technology: Zigbee 3.0, Matter
  • Battery capacity: 6500mAh
  • Connectors: USB C 5V
  • Stepping speed: 12cm/s
  • Motor rotation: 100rpm
  • Operating temperature: 0°C - 45°C
  • Humidity: 0 ~ 95% RH, non-condensing

 

 
Reset to factory default XXXResetDescription
Inclusion XXXInclusionDescription
Exclusion XXXExclusionDescription
NIF XXXNIF
Wakeup XXXWakeupDescription
Protection XXXProtection
FirmwareUpdate XXXFirmwareUpdate
SetAssociation XXXSetAssociation

Technical Data

Dimensions 0.0960000x0.1405000x0.0440000 mm
Weight 780 gr
EAN 6970504216860
Certification ID ZIG22070ZB331305-24
Frequency XXfrequency
Maximum transmission power XXantenna
Z-Wave Device