Quickstart
This is a
secure
Notification Sensor DT for XXXQFrequencyName.
To run this device please make sure the internal battery is fully charged.
Important safety information
Please read this manual carefully. Failure to follow the recommendations in this manual may be dangerous or may violate the law.
The manufacturer, importer, distributor and seller shall not be liable for any loss or damage resulting from failure to comply with the instructions in this manual or any other material.
Use this equipment only for its intended purpose. Follow the disposal instructions.
Do not dispose of electronic equipment or batteries in a fire or near open heat sources.
Product Description
The 4 in 1 multi-sensor PST10 has PIR, door/window, temperature and light sensor for combining several functionalities in one device.
Reset to factory default |
XXXResetDescription |
Inclusion |
XXXInclusionDescription |
Exclusion |
XXXExclusionDescription |
NIF |
XXXNIF |
Wakeup |
XXXWakeupDescription |
Protection |
XXXProtection |
FirmwareUpdate |
XXXFirmwareUpdate |
SetAssociation |
XXXSetAssociation |
Association Groups:
Group Number |
Maximum Nodes |
Description |
1 |
1 |
|
2 |
5 |
|
Technical Data
Hardware Platform |
ZGM130S037HGN2 / ZGM130S037HGN1 |
Device Type |
Notification Sensor DT |
Network Operation |
Reporting Sleeping Slave |
Firmware Version |
HW: 01 FW: 01.01:01.01 |
Z-Wave Version |
7.15.1 |
Certification ID |
ZC14-21120029 |
Firmware Updatable |
Updatable by Consumer by RF |
Color |
White |
Frequency |
XXfrequency |
Maximum transmission power |
XXantenna |