Quickstart

This is a Z-Wave Device for XXXQFrequencyName. To run this device please connect it to your mains power supply.



Important safety information

Please read this manual carefully. Failure to follow the recommendations in this manual may be dangerous or may violate the law. The manufacturer, importer, distributor and seller shall not be liable for any loss or damage resulting from failure to comply with the instructions in this manual or any other material. Use this equipment only for its intended purpose. Follow the disposal instructions. Do not dispose of electronic equipment or batteries in a fire or near open heat sources.

Product Description

Pin Length 43mm / Screws included M5x55 - Lockable version.

NOTE: Measure the pin length of your existing door handle before you order. The pin length can be determined according to the picture in the gallery.

Monitors the status of windows in your Smart Home.
The eWindow handle ConnectSense reliably detects break-in attempts on the window and reports them to the smart home control center. For this purpose, both the position of the handle (closed, tilted, open) and that of the window sash (closed, open) are detected and reported. The constant comparison of handle and sash position accurately detects whether a window is actually open or whether only the handle is in the open position without the sash having been moved. The ConnectSense eWindow handle offers extensive functions for monitoring the window status in the building - even on the move via smartphone message if required.

Detects attempted window break-in.
A special algorithm distinguishes between an actual break-in attempt (e.g., prying open the window) and an accidental shake (e.g., caused by children playing ball). Users can define deterrent measures via their smart home control panel, which are triggered when an attempted break-in is detected.

Provides more convenience.
Independently of the burglary attempt detection, the eWindow handle ConnectSense can be used to define scenarios that provide more energy efficiency and comfort. For example:

  • Automatic throttling of heating or air conditioning when the window is open for ventilation.
  • Automatic closing of the roller shutters only when the patio door is closed.

Other scenarios are possible - depending on the setup of the smart home system and the preferences of the occupants.

Transmission security.
The ConnectSense eWindow handle works with the standard Z-Wave Plus wireless protocol. It is equipped with the current "S2" security standard and establishes encrypted communication in combination with a Z-Wave Plus smart home control center. The radio signal is transmitted to the smart home control center both cyclically (e.g. every hour) and when the handle is operated or in the event of a break-in attempt.

Features:

  • Pin length: 43mm
  • Screw length included: M5x55
  • Lockable Handle version with included keys
  • Built with Z-Wave 700 series - higher range, more efficient and better performance compared to older generation series
  • Detection of open, closed or tilted
  • Wireless technology: Z-Wave Plus V2
  • SmartStart
  • S2 Security
  • Battery powered, up to 2 years battery lifetime, included battery: LR6 - 3,6V
  • Delivery time about 5 to 6 weeks from order date

Reset to factory default XXXResetDescription
Inclusion XXXInclusionDescription
Exclusion XXXExclusionDescription
NIF XXXNIF
Wakeup XXXWakeupDescription
Protection XXXProtection
FirmwareUpdate XXXFirmwareUpdate
SetAssociation XXXSetAssociation

Technical Data

Dimensions 0.1450000x0.1400000x0.0350000 mm
Weight 423 gr
EAN 4012789992649
Certification ID ZC12-22050338
Frequency Europe - 868,4 Mhz
Maximum transmission power 5 mW
EuropeZ-Wave Device