Philio
Multiple Sound Siren
SKU: PSE04-JP
Quickstart
This is a
Important safety information
Please read this manual carefully. Failure to follow the recommendations in this manual may be dangerous or may violate the law. The manufacturer, importer, distributor and seller shall not be liable for any loss or damage resulting from failure to comply with the instructions in this manual or any other material. Use this equipment only for its intended purpose. Follow the disposal instructions. Do not dispose of electronic equipment or batteries in a fire or near open heat sources.Product Description
The PSE04 is the Z-Wave Plusproduct, it support the security, OTA... Those newest features of the Z-WaveTM technology. Z-WaveTM is a wireless communication protocol designed for homeautomation, speci cally to remotely control applications in residential and light commercial environments. The technology usesa low-power RF radio embedded or retro tted into home electronics devices and systems, such as lighting, home access control,
| Reset to factory default | XXXResetDescription |
| Inclusion | XXXInclusionDescription |
| Exclusion | XXXExclusionDescription |
| NIF | XXXNIF |
| Wakeup | XXXWakeupDescription |
| Protection | XXXProtection |
| FirmwareUpdate | XXXFirmwareUpdate |
| SetAssociation | XXXSetAssociation |
Association Groups:
| Group Number | Maximum Nodes | Description |
|---|---|---|
| 1 | 1 | Lifeline group. This machine provides one groups of nodes. Each group can set 1 Nodes. Used for returned events. |
Configuration Parameters
Parameter 1: Auto Report Tick Interval
The interval time for auto report each tick. Size: 1 Byte, Default Value: 30
| Setting | Description |
|---|---|
| 0 - 255 | The interval time for auto report each tick. |
Parameter 2: Sound Duration
Play sound duration, 1 tick is 30 seconds. Size: 1 Byte, Default Value: 6
| Setting | Description |
|---|---|
| 0 - 255 | Play sound duration, 1 tick is 30 seconds. |
Parameter 3: Customer Function
Customer function switch, using bit control. Bit0: Disable Trigger Alarm. 0:Enable , 1:Disable. Bit1: Disable Sound. Onlyusing optical alarm. 0:Enable , 1:Disable. Bit2: Temperature Unit. 0:Fahrenheit , 1:Celsius. The Maxmum Value is 255. Size: 1 Byte, Default Value: 0
| Setting | Description |
|---|---|
| 0 | Customer function switch, using bit control. The Maxmum Value is 255. |
Parameter 4: Auto Report Temperature Time
The interval time for auto report the temperature. Size: 1 Byte, Default Value: 12
| Setting | Description |
|---|---|
| 0 - 255 | The interval time for auto report the temperature. |
Parameter 5: Temperature Differential Report
The temperature differential to report. Size: 1 Byte, Default Value: 0
| Setting | Description |
|---|---|
| 0 - 255 | The temperature di erential to report. |
Parameter 6: Auto Report Battery Time
The interval time for auto report the battery level. Size: 1 Byte, Default Value: 12
| Setting | Description |
|---|---|
| 0 - 255 | The interval time for auto report the battery level. |
Parameter 7: Play Sound Control
Control play sound's level and which sound. Size: 1 Byte, Default Value: 67
| Setting | Description |
|---|---|
| 0 - 255 | Control play sound's level and which sound. |
Technical Data
| Hardware Platform | ZGM130 |
| Device Type | Sound Switch DT |
| Network Operation | Listening Sleeping Slave |
| Firmware Version | HW: 1 FW: 1.02:01.02 |
| Z-Wave Version | 7.15.1 |
| Certification ID | ZC12-21080296 |
| Z-Wave Product Id | 0x013C.0x0004.0x0084 |
| Firmware Updatable | Not Updatable |
| Frequency | XXfrequency |
| Maximum transmission power | XXantenna |