Square D
Z-Wave Plus Plug-in
SKU: SQR62102WHZ
Quickstart
This is a
Important safety information
Please read this manual carefully. Failure to follow the recommendations in this manual may be dangerous or may violate the law. The manufacturer, importer, distributor and seller shall not be liable for any loss or damage resulting from failure to comply with the instructions in this manual or any other material. Use this equipment only for its intended purpose. Follow the disposal instructions. Do not dispose of electronic equipment or batteries in a fire or near open heat sources.Product Description
The Square D 15 Amp Z-Wave Plus Energy Monitoring Plug-In Duplex Receptacle is the professionals choice for secure reliable lighting control.Easily upgrade a standard receptacle to offer control, excellent for temporary applications like Christmas lighting.Perfect for monitoring energy usage of the device plugged into the controlled outlet.It works with any Z-Wave hub and can be grouped with up to 5 other Z-Wave Plus devices.
| Reset to factory default | XXXResetDescription |
| Inclusion | XXXInclusionDescription |
| Exclusion | XXXExclusionDescription |
| NIF | XXXNIF |
| Wakeup | XXXWakeupDescription |
| Protection | XXXProtection |
| FirmwareUpdate | XXXFirmwareUpdate |
| SetAssociation | XXXSetAssociation |
Association Groups:
| Group Number | Maximum Nodes | Description |
|---|---|---|
| 1 | 5 | Members of this group will receive unsolicited messages related to the status of thePlug. |
| 2 | 5 | Sends Basic Set to associated devices, when Short press the Program Button 2 times. |
Configuration Parameters
Parameter 1: LED indicator Status
Synchronization of load power and LED indicator. Size: 1 Byte, Default Value: 1
| Setting | Description |
|---|---|
| 0 | Power On, LED Off; Power Off, LED On |
| 1 | Power On, LED On;Power Off, LED Off |
Parameter 2: Delayed OFF Time
Delay off means when users pressbutton to turn off the load,theres a reaction time. Size: 1 Byte, Default Value: 0
| Setting | Description |
|---|---|
| 0 - 240 | Delay off means when users press button to turn off the load, theres a reaction time. |
Parameter 3: Power On Status
Size: 1 Byte, Default Value: 1
| Setting | Description |
|---|---|
| 1 | Off |
| 2 | On |
| 3 | Last State |
Parameter 4: Child Lockout Enable
Child lockout feature can enabled anddisabled local control. Size: 1 Byte, Default Value: 0
| Setting | Description |
|---|---|
| 0 | Disable |
| 1 | Enable |
Technical Data
| Hardware Platform | ZGM130 |
| Device Type | Binary Switch |
| Network Operation | Always On Slave |
| Firmware Version | HW: 1 FW: 1.05 |
| Z-Wave Version | 7.13.6 |
| Certification ID | ZC12-21050231 |
| Z-Wave Product Id | 0x0447.0x000E.0x1108 |
| Z-Wave Scene Type | Central Scene |
| Frequency | XXfrequency |
| Maximum transmission power | XXantenna |