Quickstart

This is a secure Lock for XXXQFrequencyName. To run this device please make sure the internal battery is fully charged.



Important safety information

Please read this manual carefully. Failure to follow the recommendations in this manual may be dangerous or may violate the law. The manufacturer, importer, distributor and seller shall not be liable for any loss or damage resulting from failure to comply with the instructions in this manual or any other material. Use this equipment only for its intended purpose. Follow the disposal instructions. Do not dispose of electronic equipment or batteries in a fire or near open heat sources.

Product Description

Never worry about carrying around or losing your keys again. Unlock and lock your home with ease from the backlit touchscreen keypad. Create unique entry codes for friends and family and remove codes whenever you need to. This lock features Z-Wave and seamlessly integrates into 50+ home automation and security systems. When added to most Z-Wave automation systems, lock and unlock your door, create pin codes, view access history and receive notifications from anywhere. The lock is tamper resistant, easy to install and even easier to use!

Reset to factory default XXXResetDescription
Inclusion XXXInclusionDescription
Exclusion XXXExclusionDescription
NIF XXXNIF
Wakeup XXXWakeupDescription
Protection XXXProtection
FirmwareUpdate XXXFirmwareUpdate
SetAssociation XXXSetAssociation

Association Groups:

Group Number Maximum Nodes Description
1 3 the description is lifeline.

Configuration Parameters

Parameter 1: Volume

Set Volume Level to high (1), low (2), or silent (3).
Size: 1 Byte, Default Value: 2

Setting Description
1 - 3 Volume

Parameter 11: One Touch Locking

Set One Touch Locking feature to enable or disable.
Size: 1 Byte, Default Value: 255

Setting Description
0 - 255 One Touch Locking

Parameter 12: Privacy Button

Set Privacy Button feature to enable or disable.
Size: 1 Byte, Default Value: 0

Setting Description
0 - 255 Privacy Button

Parameter 13: Lock Status LED

Set Lock Status LED feature to enable or disable.
Size: 1 Byte, Default Value: 0

Setting Description
0 - 255 Lock Status LED

Parameter 2: Auto Relock

Set Auto Relock feature to enable or disable.
Size: 1 Byte, Default Value: 0

Setting Description
0 - 255 Auto Relock

Parameter 3: Relock Time

Adjust the time your lock will auto relock.
Size: 1 Byte, Default Value: 30

Setting Description
0 - 127 Relock Time

Parameter 4: Wrong Code Entry Limit

Adjust the limit for wrong code entries allowed by your lock.
Size: 1 Byte, Default Value: 5

Setting Description
0 - 5 Wrong Code Entry Limit

Parameter 5: Language

Set the language to English (1), Spanish (2), or French (3).
Size: 1 Byte, Default Value: 1

Setting Description
1 - 3 Language

Parameter 6: Shut Down Time

Adjust the time your lock is shutdown after reaching its wrong code entry limit.
Size: 1 Byte, Default Value: 60

Setting Description
0 - 127 Shut Down Time

Parameter 7: Operating Mode

Set the Operating Mode to normal mode(0), vacation mode(1) or privacy mode(2).
Size: 1 Byte, Default Value: 0

Setting Description
0 - 2 Operating Mode

Parameter 8: Reset to Factory Resets

Lock will execute Reset To Factory when parameter is set.
Size: 1 Byte, Default Value: 1

Setting Description
1 Reset to Factory Resets

Technical Data

Hardware Platform ZGM130
Device Type Lock
Network Operation Listening Sleeping Slave
Firmware Version HW: 2 FW: 2.13:43.19
Z-Wave Version 7.12.2
Certification ID ZC12-21020185
Z-Wave Product Id 0x0129.0x8004.0x46C1
Color Antique Brass
Communications Connections None
Firmware Updatable Updatable by Consumer by RF
Controller Supports Multiple Z-Wave Interfaces ok
Communications Protocol Z-Wave Serial API
Door Lock Type Deadbolt
Frequency XXfrequency
Maximum transmission power XXantenna
Lock