Jasco
Portable Remote, Simple Controller, 2 Button
SKU: 53829/ZW5313
Quickstart
This is a
Important safety information
Please read this manual carefully. Failure to follow the recommendations in this manual may be dangerous or may violate the law. The manufacturer, importer, distributor and seller shall not be liable for any loss or damage resulting from failure to comply with the instructions in this manual or any other material. Use this equipment only for its intended purpose. Follow the disposal instructions. Do not dispose of electronic equipment or batteries in a fire or near open heat sources.Product Description
Custom lighting control is at your fingertips with the Jasco Z-Wave 2-Button Portable Hub Remote. This versatile remote communicates with your hub to activate up to 6 unique, lighting scenes. Once the remote is connected to your existing network, you can begin programming the lights to personalize your indoor space. The wireless lighting control has an overall signal range of up to 150 feet and is compatible with any device that works with your hub.Enjoy a variety of placement options for your lighting controlutilize the included hardware and magnetic bracket for wall mounting, detach the remote for instant portability or pair the remote with a separate stand for convenient tabletop use. The hub remote also functions on a scalable system, giving you the freedom to start with one remote and add as many as you need. Take control of your lights with the Z-Wave 2 Button Portable Hub Remote.
| Reset to factory default | XXXResetDescription |
| Inclusion | XXXInclusionDescription |
| Exclusion | XXXExclusionDescription |
| NIF | XXXNIF |
| Wakeup | XXXWakeupDescription |
| Protection | XXXProtection |
| FirmwareUpdate | XXXFirmwareUpdate |
| SetAssociation | XXXSetAssociation |
Association Groups:
| Group Number | Maximum Nodes | Description |
|---|---|---|
| 1 | 5 | Association Group 1 supports Lifeline, Battery Reports, Device Reset Locally Notification, Central Scene, Indicator Report |
| 2 | 5 | Association Group 2 supports Basic Set and is controlled by pressing the UP or Downbutton once. |
| 3 | 5 | Association Group 3 supports Basic Set and is controlled by double pressing the UP or Down button twice. |
Configuration Parameters
Parameter 2: Controller Work Mode
Enable/ Disable Group 2 and 3 Size: 1 Byte, Default Value: 1
| Setting | Description |
|---|---|
| 0 | Enabled- Normal Operation |
| 1 | Disabled Groups 2 and 3 |
Technical Data
| Hardware Platform | ZGM130 |
| Device Type | Central Scene Device |
| Network Operation | Reporting Sleeping Slave |
| Firmware Version | HW: 1 FW: 7.04 |
| Z-Wave Version | 7.13.6 |
| Certification ID | ZC12-20090119 |
| Z-Wave Product Id | 0x0063.0x4843.0x3136 |
| Z-Wave Scene Type | Central Scene |
| Firmware Updatable | Updatable by Consumer by RF |
| Frequency | XXfrequency |
| Maximum transmission power | XXantenna |