LG U+
Open Sensor
SKU: osr-02
Quickstart
This is a
Important safety information
Please read this manual carefully. Failure to follow the recommendations in this manual may be dangerous or may violate the law. The manufacturer, importer, distributor and seller shall not be liable for any loss or damage resulting from failure to comply with the instructions in this manual or any other material. Use this equipment only for its intended purpose. Follow the disposal instructions. Do not dispose of electronic equipment or batteries in a fire or near open heat sources.Product Description
Remote Access via smart phone APP Detecting the status of Door/Windows equipped with Z-WAVE Open Sensor and notifying the status to a customer. Checking the battery usage and reporting the low battery alarm.
| Reset to factory default | XXXResetDescription |
| Inclusion | XXXInclusionDescription |
| Exclusion | XXXExclusionDescription |
| NIF | XXXNIF |
| Wakeup | XXXWakeupDescription |
| Protection | XXXProtection |
| FirmwareUpdate | XXXFirmwareUpdate |
| SetAssociation | XXXSetAssociation |
Association Groups:
| Group Number | Maximum Nodes | Description |
|---|---|---|
| 1 | 5 | Z-Wave Plus Lifeline |
Configuration Parameters
Parameter 1: Battery Period
Battery Report Period Value Size: 1 Byte, Default Value: 24
| Setting | Description |
|---|---|
| 1 - 127 | Battery Report Period Value |
Technical Data
| Hardware Platform | ZGM130 |
| Device Type | Notification Sensor |
| Network Operation | Reporting Sleeping Slave |
| Firmware Version | HW: 1 FW: 39.16 |
| Z-Wave Version | 7.11.1 |
| Certification ID | ZC12-19090010 |
| Z-Wave Product Id | 0x022C.0x0060.0x0001 |
| Color | |
| Frequency | XXfrequency |
| Maximum transmission power | XXantenna |