Jasco
Plug-in Smart Switch (Dual Plug with Pass through Outlet)
SKU: 55250/ZW4104
Quickstart
This is a
Important safety information
Please read this manual carefully. Failure to follow the recommendations in this manual may be dangerous or may violate the law. The manufacturer, importer, distributor and seller shall not be liable for any loss or damage resulting from failure to comply with the instructions in this manual or any other material. Use this equipment only for its intended purpose. Follow the disposal instructions. Do not dispose of electronic equipment or batteries in a fire or near open heat sources.Product Description
Transform any home into a smart home with the Jasco Z-Wave Smart Lighting Control and Appliance Module. The lighting control enables wireless control of on/off functions for standard table and floor lamps, and is compatible with incandescent, LED, Xenon, Halogen, fluorescent and compact fluorescent bulbs. Easily controlled by your mobile device or computer using any Z-Wave certified gateway, the space-saving horizontal module plugs into a standard wall receptacle without blocking the second outlet or obstructing placement of furniture. It provides a Z-Wave enabled outlet for the lamp or appliance that you would like to control and a regular pass-through AC outlet for other electrical appliances. Perfect for plug-in fans, heaters, lamps and more! Take control of your home lighting with Jasco Z-Wave Smart Lighting Controls!
| Reset to factory default | XXXResetDescription |
| Inclusion | XXXInclusionDescription |
| Exclusion | XXXExclusionDescription |
| NIF | XXXNIF |
| Wakeup | XXXWakeupDescription |
| Protection | XXXProtection |
| FirmwareUpdate | XXXFirmwareUpdate |
| SetAssociation | XXXSetAssociation |
Association Groups:
| Group Number | Maximum Nodes | Description |
|---|---|---|
| 1 | 5 | Z-Wave Plus Lifeline |
| 2 | 5 | Supports Basic Set and is controlled with the local load |
| 3 | 5 | Supports Basic Set and is controlled by double pressing the button |
Configuration Parameters
Parameter 3: LED Light
0 = Light is ON when Load is ON (Default)1 = Light is On when Load is Off2 = Light is always OFF3 = Light is always ON Size: 1 Byte, Default Value: 0
| Setting | Description |
|---|---|
| 0 | LED On when load is On, LED Off when load is Off (Default) |
| 1 | LED is guidelight |
| 2 | Always OFF |
| 3 | Always ON |
Technical Data
| Hardware Platform | ZM5202 |
| Device Type | On/Off Power Switch |
| Network Operation | Always On Slave |
| Firmware Version | HW: 255 FW: 5.51 |
| Z-Wave Version | 6.82.00 |
| Certification ID | ZC10-20086960 |
| Z-Wave Product Id | 0x0063.0x5052.0x3134 |
| Z-Wave Scene Type | Central Scene |
| Firmware Updatable | Updatable by Consumer by RF |
| Switch Type | Push Button with Indicator |
| Frequency | XXfrequency |
| Maximum transmission power | XXantenna |