This is a
Door/Window Sensor is a wireless reed sensor powered by AAA battery. It is used for detecting the opening or closing of doors, windows. It can communicate with an associated Z-Wave device, such as Siren, Smart Switch, etc.
Reset to factory default | XXXResetDescription |
Inclusion | XXXInclusionDescription |
Exclusion | XXXExclusionDescription |
NIF | XXXNIF |
Wakeup | XXXWakeupDescription |
Protection | XXXProtection |
FirmwareUpdate | XXXFirmwareUpdate |
SetAssociation | XXXSetAssociation |
Group Number | Maximum Nodes | Description |
---|---|---|
1 | 5 | Z-Wave Plus Lifeline |
2 | 5 | Sensor will send Basic Set when the sensor body and magnet removed or combined. |
Door/Window Sensor can reverse its value of BASIC SET when the magnet is triggered. Size: 1 Byte, Default Value: 0
Setting | Description |
---|---|
0 | Send BASIC SET VALUE = 255 to nodes associated with group 2 when door/window is opened.Send BASIC SET VALUE = 0 to nodes associated with group 2 when door/window is closed. |
1 | Send BASIC SET VALUE = 0 to nodes associated with group 2 when door/window is opened.Send BASIC SET VALUE = 255 to nodes associated with group 2 when door/window is closed. |
This parameter defines a battery level as the low battery. Size: 1 Byte, Default Value: 20
Setting | Description |
---|---|
10 - 50 | the value here defines the low battery |
Hardware Platform | ZM5202 |
Device Type | Notification Sensor |
Network Operation | Reporting Sleeping Slave |
Firmware Version | HW: 1 FW: 2.00 |
Z-Wave Version | 6.81.00 |
Certification ID | ZC10-20076931 |
Z-Wave Product Id | 0x0208.0x0200.0x0008 |
Sensors | |
Supported Notification Types | |
Frequency | XXfrequency |
Maximum transmission power | XXantenna |