Resideo
Plug-in Outdoor Smart Switch
SKU: 39453 / ZW4203
Quickstart
This is a
Important safety information
Please read this manual carefully. Failure to follow the recommendations in this manual may be dangerous or may violate the law. The manufacturer, importer, distributor and seller shall not be liable for any loss or damage resulting from failure to comply with the instructions in this manual or any other material. Use this equipment only for its intended purpose. Follow the disposal instructions. Do not dispose of electronic equipment or batteries in a fire or near open heat sources.Product Description
Transform any home into a smart home with the Resideo Z-Wave Plug-in Outdoor Switch. The Switch enables wireless control of on/off functions for outdoor applications, and is compatible with incandescent, LED, Xenon, Halogen, fluorescent and compact fluorescent bulbs. The weather-resistant housing with a protective outlet cover safeguards the outlet from dirt and debris when not in use. The discreet black color blends in with any outdoor environment. Perfect for decorative or seasonal lighting, fountains and other outdoor plug-in appliances. Take control of your home lighting with Resideo Z-Wave Smart Controls!
| Reset to factory default | XXXResetDescription |
| Inclusion | XXXInclusionDescription |
| Exclusion | XXXExclusionDescription |
| NIF | XXXNIF |
| Wakeup | XXXWakeupDescription |
| Protection | XXXProtection |
| FirmwareUpdate | XXXFirmwareUpdate |
| SetAssociation | XXXSetAssociation |
Association Groups:
| Group Number | Maximum Nodes | Description |
|---|---|---|
| 1 | 5 | Supports Device Reset Locally and receives unsolicited status updates |
| 2 | 5 | Association Group 2 supports Basic Set and is controlled by single pressing the button |
| 3 | 5 | Association Group 3 supports Basic Set and is controlled by double pressing the button |
Configuration Parameters
Parameter 19: Parameter 19
Alternate Exclusion Size: 1 Byte, Default Value: 0
| Setting | Description |
|---|---|
| 0 | Alternate Exclusion |
| 1 | Press two times ON button and two time OFF button, LED will flash 5 times if successful |
Parameter 3: Parameter 3
LED Indication Configuration Size: 1 Byte, Default Value: 1
| Setting | Description |
|---|---|
| 0 | LED ON when device is OFF, LED is OFF when device is ON |
| 1 | LED ON when device is ON, LED is OFF when device is OFF |
| 2 | LED always OFF |
| 3 | LED Always ON |
Technical Data
| Hardware Platform | ZM5202 |
| Device Type | On/Off Power Switch |
| Network Operation | Always On Slave |
| Firmware Version | HW: 255 FW: 5.52 |
| Z-Wave Version | 6.81.03 |
| Certification ID | ZC10-20036900 |
| Z-Wave Product Id | 0x041B.0x4F50.0x3035 |
| Firmware Updatable | Updatable by Consumer by RF |
| Z-Wave Scene Type | Central Scene |
| Frequency | XXfrequency |
| Maximum transmission power | XXantenna |