Quickstart
This is a
secure
Notification Sensor for XXXQFrequencyName.
To run this device please make sure the internal battery is fully charged.
Important safety information
Please read this manual carefully. Failure to follow the recommendations in this manual may be dangerous or may violate the law.
The manufacturer, importer, distributor and seller shall not be liable for any loss or damage resulting from failure to comply with the instructions in this manual or any other material.
Use this equipment only for its intended purpose. Follow the disposal instructions.
Do not dispose of electronic equipment or batteries in a fire or near open heat sources.
Product Description
Two-stage glass break sensors can accurately listen for the initial glass breaking and shattering.We have performed extensive testing to improve this products sound detection capabilities.
| Reset to factory default |
XXXResetDescription |
| Inclusion |
XXXInclusionDescription |
| Exclusion |
XXXExclusionDescription |
| NIF |
XXXNIF |
| Wakeup |
XXXWakeupDescription |
| Protection |
XXXProtection |
| FirmwareUpdate |
XXXFirmwareUpdate |
| SetAssociation |
XXXSetAssociation |
Association Groups:
| Group Number |
Maximum Nodes |
Description |
| 1 |
5 |
Association Group 1 MUST be used for the Lifeline association. All events which are mandated by a Device Type MUST be reported via the Lifeline association. |
| 2 |
5 |
This group is triggered when the glass breaking sound has been detected. |
Technical Data
| Hardware Platform |
ZM5101 |
| Device Type |
Notification Sensor |
| Network Operation |
Reporting Sleeping Slave |
| Firmware Version |
HW: 1 FW: 1.00 |
| Z-Wave Version |
6.82.00 |
| Certification ID |
ZC10-20036896 |
| Z-Wave Product Id |
0x0109.0x202F.0x2F01 |
| Firmware Updatable |
Updatable by Manufacturer Representative |
| Color |
White |
| Frequency |
XXfrequency |
| Maximum transmission power |
XXantenna |
