Jasco
Plug-in Outdoor Smart Switch
SKU: 14325/ZW4203
Quickstart
This is a
Important safety information
Please read this manual carefully. Failure to follow the recommendations in this manual may be dangerous or may violate the law. The manufacturer, importer, distributor and seller shall not be liable for any loss or damage resulting from failure to comply with the instructions in this manual or any other material. Use this equipment only for its intended purpose. Follow the disposal instructions. Do not dispose of electronic equipment or batteries in a fire or near open heat sources.Product Description
New Plug-in Outdoor Smart Switch is equipped with S2 and SmartStart which allows for easy and secure inclusion.
| Reset to factory default | XXXResetDescription |
| Inclusion | XXXInclusionDescription |
| Exclusion | XXXExclusionDescription |
| NIF | XXXNIF |
| Wakeup | XXXWakeupDescription |
| Protection | XXXProtection |
| FirmwareUpdate | XXXFirmwareUpdate |
| SetAssociation | XXXSetAssociation |
Association Groups:
| Group Number | Maximum Nodes | Description |
|---|---|---|
| 1 | 5 | Association Group 1 supports Lifeline and Binary Switch Report |
| 2 | 5 | Association Group 2 supports Basic Set and is controlled by pressing the ON/OFF button with the local load |
| 3 | 5 | Association Group 3 supports Basic Set and is controlled by double pressing the button |
Configuration Parameters
Parameter 19: Alternate Exclusion
When enabled, press 3 times and hold on the last press to remove the device during exclusion Size: 1 Byte, Default Value: 0
| Setting | Description |
|---|---|
| 0 | Disabled |
| 0 - 1 | Enabled |
Parameter 3: LED Indicator Configuration
Size: 1 Byte, Default Value: 1
| Setting | Description |
|---|---|
| 0 | LED ON when device is OFF, LED is OFF when device is ON |
| 1 | (Default) - LED ON when device is ON, LED is OFF when device is OFF |
| 2 | LED always OFF |
| 3 | LED always ON |
Technical Data
| Hardware Platform | ZM5202 |
| Device Type | On/Off Power Switch |
| Network Operation | Always On Slave |
| Firmware Version | HW: 255 FW: 5.52 |
| Z-Wave Version | 6.81.03 |
| Certification ID | ZC10-19106779 |
| Z-Wave Product Id | 0x0063.0x4F50.0x3035 |
| Color | Black |
| Z-Wave Scene Type | Central Scene |
| Frequency | XXfrequency |
| Maximum transmission power | XXantenna |