This is a
ELTEX Z-Wave STICK is a USB 2.0 hardware device for connecting Z-Wave products. The USB STICK operates as a hardware interface for connection ofZ-Wave devices on a network with a host:The device operates at 869 MHz using Z-Wave radio protocol to interact with devices on a Z-Wave network. Connecting to a PC/ laptop or other system through USB 2.0, the device transmits data gathered from the Z-Wave devices to a host. Thus,ELTEX Z-Wave STICK connects devices on the network with a network controller.General characteristics:Radio protocol: Z-WaveRadio frequency: 869 MHzInterface: USB 2.0Z-Wave hardware platform: ZM5101500 SeriesZ-Wave Role Type: Hardware deviceUsing ELTEX Z-Wave STICK together with Z-Wave controller, you may manage your Z-Wave network: add and remove devices, monitor status of the devices on the network, create scenarios and templates for the network operation and much more.
Reset to factory default | XXXResetDescription |
Inclusion | XXXInclusionDescription |
Exclusion | XXXExclusionDescription |
NIF | XXXNIF |
Wakeup | XXXWakeupDescription |
Protection | XXXProtection |
FirmwareUpdate | XXXFirmwareUpdate |
SetAssociation | XXXSetAssociation |
Hardware Platform | ZM5101 |
Device Type | Hardware Device |
Network Operation | Hardware Device |
Firmware Version | HW: 0 FW: ERROR |
Z-Wave Version | 6.81.04 |
Certification ID | ZC10-19106773 |
Communications Protocol | Z-Wave Serial API |
Frequency | XXfrequency |
Maximum transmission power | XXantenna |