Ilumin by Inovelli
Tunable White Smart Bulb
SKU: LZW41
Quickstart
This is a
Important safety information
Please read this manual carefully. Failure to follow the recommendations in this manual may be dangerous or may violate the law. The manufacturer, importer, distributor and seller shall not be liable for any loss or damage resulting from failure to comply with the instructions in this manual or any other material. Use this equipment only for its intended purpose. Follow the disposal instructions. Do not dispose of electronic equipment or batteries in a fire or near open heat sources.Product Description
With 806 lumens, tunable white, and smooth dimming, this bulb has it all. Best part? It's powered by Z-Wave Plus technology. Imagine walking into a room, tapping a switch (hopefully Inovelli) and your ilumin lights come on to a beautiful movie scene. Or as you're winding down for the night, switch from cool white to warm and gradually dim off the lights as you drift to sleep. These are some of the many things you can do with smart bulbs and we're excited to be able to share them with you.
| Reset to factory default | XXXResetDescription |
| Inclusion | XXXInclusionDescription |
| Exclusion | XXXExclusionDescription |
| NIF | XXXNIF |
| Wakeup | XXXWakeupDescription |
| Protection | XXXProtection |
| FirmwareUpdate | XXXFirmwareUpdate |
| SetAssociation | XXXSetAssociation |
Association Groups:
| Group Number | Maximum Nodes | Description |
|---|---|---|
| 1 | 1 | 1. When the state of the LED Bulb is changed: a) Set Configuration parameter 50 to 0: Nothing. b) Set Configuration parameter 50 to 1: Sending Switch Multilevel Report. 2. Device Reset Locally. |
Configuration Parameters
Parameter 2: Memory Function
This parameter will determine how your bulb behaves after power is restored to it from an outage. Size: 1 Byte, Default Value: 0
| Setting | Description |
|---|---|
| 0 | Remembers Last State |
| 1 | Bulb turns ON after power outage |
| 2 | Bulb turns OFF after power outage |
Parameter 51: Color Adjustment (Warm White)
This parameter adjusts the bulb along the warm-white spectrum. Size: 2 Byte, Default Value: 1387
| Setting | Description |
|---|---|
| 1387 - 4999 | Changes the Kelvin from 2700k (1387) to 4999k (4999) |
Parameter 52: Color Adjustment (Cool White)
This parameter adjusts the bulb along the cool-white spectrum. Size: 2 Byte, Default Value: 5000
| Setting | Description |
|---|---|
| 5000 - 6500 | Changes the Kelvin from 5000k (5000) to 6500k (6500) |
Technical Data
| Hardware Platform | ZM5101 |
| Device Type | Light Dimmer Switch |
| Network Operation | Always On Slave |
| Firmware Version | HW: 255 FW: 2.24 |
| Z-Wave Version | 6.51.09 |
| Certification ID | ZC10-19086719 |
| Z-Wave Product Id | 0x031E.0x0006.0x0001 |
| Firmware Updatable | Updatable by Manufacturer |
| Frequency | XXfrequency |
| Maximum transmission power | XXantenna |