Honeywell
Plug-in Outdoor Smart Switch
SKU: 39363/ZW4203
Quickstart
This is a
Important safety information
Please read this manual carefully. Failure to follow the recommendations in this manual may be dangerous or may violate the law. The manufacturer, importer, distributor and seller shall not be liable for any loss or damage resulting from failure to comply with the instructions in this manual or any other material. Use this equipment only for its intended purpose. Follow the disposal instructions. Do not dispose of electronic equipment or batteries in a fire or near open heat sources.Product Description
Transform any home into a smart home with the Honeywell Z-Wave Outdoor Smart Switch. The lighting control enables wireless control of on/off functions for outdoor applications, and is compatible with incandescent, LED, Xenon, Halogen, fluorescent and compact fluorescent bulbs. The discreet black color blends in with any outdoor environment. Perfect for decorative or seasonal lighting, fountains and other outdoor plug-in appliances. Our New Plug-in Outdoor Smart Switch is equipped with S2 and Smart Start which allows for easy and secure inclusion. Take control of your home lighting with Honeywell Z-Wave Smart Lighting Controls!
| Reset to factory default | XXXResetDescription |
| Inclusion | XXXInclusionDescription |
| Exclusion | XXXExclusionDescription |
| NIF | XXXNIF |
| Wakeup | XXXWakeupDescription |
| Protection | XXXProtection |
| FirmwareUpdate | XXXFirmwareUpdate |
| SetAssociation | XXXSetAssociation |
Association Groups:
| Group Number | Maximum Nodes | Description |
|---|---|---|
| 1 | 5 | Association Group 1 supports Lifeline, Binary Switch Report |
| 2 | 5 | Association Group 2 supports Basic Set and is controlled with the local load |
| 3 | 5 | Association Group 3 supports Basic Set and is controlled by double pressing the button |
Configuration Parameters
Parameter 19: Alternate Exclusion
Size: 1 Byte, Default Value: 0
| Setting | Description |
|---|---|
| 0 | Press the button once to exclude |
| 1 | Press the button twice and hold on the third press |
Parameter 3: LED Indication Configuration
Size: 1 Byte, Default Value: 1
| Setting | Description |
|---|---|
| 0 | LED ON when device is OFF, LED is OFF when device is ON |
| 1 | LED ON when device is ON, LED is OFF |
| 2 | LED always OFF |
| 3 | LED always ON |
Technical Data
| Hardware Platform | ZM5202 |
| Device Type | On/Off Power Switch |
| Network Operation | Always On Slave |
| Firmware Version | HW: 255 FW: 5.52 |
| Z-Wave Version | 6.81.03 |
| Certification ID | ZC10-19076672 |
| Z-Wave Product Id | 0x0039.0x4F50.0x3034 |
| Electric Load Type | FluorescentIncandescentInductive (e.g. Motor)LED |
| Outdoor Use | ok |
| Color | Black |
| Frequency | XXfrequency |
| Maximum transmission power | XXantenna |