ID Lock 150 Z-Wave module

Parameter 1: Away and lock mode

Away mode off or onAuto or Manual Lock modeIn auto Lock mode the door Locks Three Seconds after closing the door.In manual Lock mode the door Locks when pressing O/C button or activating touchpanel.When away mode is on the inside O/C button is deactivated.
Size: 1 Byte, Default Value: 1

Setting	Description
0	Away mode off - Manual lock mode
1	Away mode off - Auto lock mode
2	Away mode on - Manual lock mode
3	Away mode on - Auto lock mode

Parameter 3: Hinge direction (Right or Left)

Direction of hinges on door.To find your correct settings look at the mounted door lock outside. If the door hinges are on the right side of the door correct setting is u0022Rightu0022. If the door hinges are on the left side of the door correct setting is u0022Leftu0022.
Size: 1 Byte, Default Value: 0

Setting	Description
0	Right hinged door
1	Left hinged door

Parameter 4: Door lock audio volume

Setting for audio volume of notifications on door lock operations.
Size: 1 Byte, Default Value: 5

Setting	Description
0 - 6	Sound volume level 0 to 6

Parameter 5: ReLock mode

ReLock mode is factory default on.ReLock is the security function relocking the door lock 7 seconds after a valid unlock if the door is not opened.When ReLock is off, the door lock will remain unlocked untill a new lock door operation (i.e. pressing O/C-button, activating touch panel or closing the door if auto lock mode).
Size: 1 Byte, Default Value: 1

Setting	Description
0	ReLock mode off
1	ReLock mode on

Parameter 6: Service PIN Mode

The service PIN on ID Lock 150 will be enabled or disabled according to this configuration setting. By default the Service PIN Mode is 0=Deactivated.It can be set to either 1, 2, 5 or 10 times, 12 hours, 24 hours, always valid or disabled (FE).Service PIN is identifier 108.
Size: 1 Byte, Default Value: 0

Setting	Description
0	Deactivated
1	Valid 1 time
2	Valid 2 times
3	Valid 5 times
4	Valid 10 times
8	Valid 12 hours
9	Valid 24 hours
7	Always valid

Parameter 7: Door lock model

This configuration is only available through the configuration get command.If the configuration report is 65(101), door lock model type is ID Lock 101.If the configuration report is 96(150), door lock model type is ID Lock 150.ID Lock 101 cannot have user PINs or individually deleted RFID keyfobs.ID Lock 101 cannot have Service PIN Mode (Mode on ID-101 is always on).ID Lock 101 cannot be remote configured on volume, hinge direction.ID Lock 101 does not have the ReLock function (Mod on ID-101 is always on).This is a read-only parameter, it cannot be changed.
Size: 1 Byte, Default Value: 96

Setting	Description
65	ID Lock 101
96	ID Lock 150

Parameter 8: Updater mode

Updater mode turns on or off possibility to use the ID Lock 150 Updater app.Turns off when unlocking the door.
Size: 1 Byte, Default Value: 0

Setting	Description
0	Updater mode off (silent)
1	Updater mode on (silent)
2	Updater mode off (audible)
3	Updater mode on (audible)

Parameter 9: Master PIN mode

Turns on or off Master PIN unlock capability.Master PIN is identifier 109.
Size: 1 Byte, Default Value: 1

Setting	Description
0	Master PIN cannot unlock
1	Master PIN unlocks

Technical Data