Yale Locks & Hardware
Yale Assure Lock Touchscreen Deadbolt
SKU: YRD620-ZW2
Quickstart
This is a
Enter the 4-8 master Pin code followed by the gear key.Press the 7 key followed by the gear keyPress the 1 key followed by the gear key
Important safety information
Please read this manual carefully. Failure to follow the recommendations in this manual may be dangerous or may violate the law. The manufacturer, importer, distributor and seller shall not be liable for any loss or damage resulting from failure to comply with the instructions in this manual or any other material. Use this equipment only for its intended purpose. Follow the disposal instructions. Do not dispose of electronic equipment or batteries in a fire or near open heat sources.Product Description
Never worry about carrying around or losing your keys again. Unlock and lock your home with ease from the backlit touchscreen keypad. Create unique pin codes for friends and family and remove codes whenever you need to. This Yale Real Living lock features Z-Wave technology and seamlessly integrates into 50+ home automation and security systems. When added to most Z-Wave automation systems, lock and unlock your door, create pin codes, view access history and receive notifications from anywhere. The lock is tamper resistant, easy to install and even easier to use!
| Reset to factory default | Remove the battery cover and batteries.Remove the interior escutcheon to access the reset button.The reset button is located above the PCB cable connector.While pressing the reset button for a minimum of 3 seconds, reinstall batteries. Release reset button.Replace battery cover. Please use this procedure only when the network primary controller is missing or otherwise inoperable |
| Inclusion | Enter the 4-8 master Pin code followed by the gear key.Press the 7 key followed by the gear keyPress the 1 key followed by the gear key |
| Exclusion | Enter the 4-8 digit master pin code followed by the gear keyPress the 7 key followed by the gear keyPress the 3 key followed by the gear key |
| NIF | XXXNIF |
| Wakeup | XXXWakeupDescription |
| Protection | XXXProtection |
| FirmwareUpdate | XXXFirmwareUpdate |
| SetAssociation | XXXSetAssociation |
Association Groups:
| Group Number | Maximum Nodes | Description |
|---|---|---|
| 1 | 1 | Z-Wave Plus Lifeline |
Configuration Parameters
Parameter 1: Silent Mode on/off
Level control, 1, 2, 3 default is 1. Levels are 1 and 3 for models with no spoken prompts default is 1 or high volume Size: 1 Byte, Default Value: 1
| Setting | Description |
|---|---|
| 1 - 3 | Sound level |
Parameter 11: One Touch Locking
0x00 = OFF, 0xFF = ON default is 0xFF or ON. Size: 1 Byte, Default Value: 0
| Setting | Description |
|---|---|
| -128 | One Touch Locking On |
| 0 | One Touch Locking Off |
Parameter 12: Privacy Button
0x00 = OFF, 0xFF = ON default is 0x00 or OFF Size: 1 Byte, Default Value: 0
| Setting | Description |
|---|---|
| -128 | Privacy Button On |
| 0 | Privacy Button Off |
Parameter 13: Lock Status LED
0x00 = OFF , 0xFF=ON default is 0x00 or OFF Size: 1 Byte, Default Value: 0
| Setting | Description |
|---|---|
| -128 | Lock Status LED On |
| 0 | Lock Status LED Off |
Parameter 15: Reset to Factory Defaults
01 = Lock will execute Reset To Factory.02 = Reserved for future use (Lock will currently execute Reset To Factory same as 01). No default valuePlease use this procedure only when the network primary controller is missing or otherwise inoperable. Size: 1 Byte, Default Value: 0
| Setting | Description |
|---|---|
| -128 | Reset to Factory ON |
| 0 | Reset to Factory Off |
Parameter 16: Escape Return Mode
0x00 = OFF, 0xFF = ON default is 0x00 or OFFEnables the Escape Return mode of operation for thelock. Size: 1 Byte, Default Value: 0
| Setting | Description |
|---|---|
| -128 | Escape Return On |
| 0 | Escape Return Off |
Parameter 2: Auto Relock on/off
0x00 = OFF, 0xFF = ON default is 0x00 or OFF Size: 1 Byte, Default Value: 0
| Setting | Description |
|---|---|
| -128 | Auto Relock On |
| 0 | Auto Relock OFF |
Parameter 21: Eco Mode on/off
0x00 = OFF, 0xFF = ON default is 0x00 or OFFIf supported switches lock to lower power mode ofoperation with reduced sound and led brightness. Size: 1 Byte, Default Value: 0
| Setting | Description |
|---|---|
| -128 | Eco Mode on |
| 0 | Eco Mode Off |
Parameter 3: Relock Time
10 to 180 seconds default is 30 seconds Size: 1 Byte, Default Value: 30
| Setting | Description |
|---|---|
| 10 - 127 | Seconds |
Parameter 4: Wrong Code Entry Limit
3 to 10 default is 5 times Size: 1 Byte, Default Value: 5
| Setting | Description |
|---|---|
| 3 - 10 | Times |
Parameter 5: Language
1=English, 2=Spanish, 3=French default is 1= English Size: 1 Byte, Default Value: 1
| Setting | Description |
|---|---|
| 1 | English |
| 2 | Spanish |
| 3 | French |
Parameter 7: Shut Down Time (After wrong codes)
10 to 180 seconds default is 60 seconds Size: 1 Byte, Default Value: 60
| Setting | Description |
|---|---|
| 10 - 127 | Seconds |
Parameter 8: Operating Mode
00 = normal mode (this is the default mode)01 = vacation mode, keypad lockout02 = privacy mode, no keypad. RF Unlock will work Size: 1 Byte, Default Value: 0
| Setting | Description |
|---|---|
| 0 | Normal Mode |
| 1 | Vacation Mode |
| 2 | Privacy Mode |
Technical Data
| Hardware Platform | ZM5101 |
| Device Type | Door Lock - Keypad |
| Network Operation | Listening Sleeping Slave |
| Firmware Version | HW: 255 FW: 1.78:24.00 |
| Z-Wave Version | 6.51.07 |
| Certification ID | ZC10-19066547 |
| Z-Wave Product Id | 0x0129.0x800E.0x1200 |
| Supported Notification Types | |
| Door Lock Type | |
| IP (Ingress Protection) Rated | ok |
| Sensors | |
| Outdoor Use | ok |
| Firmware Updatable | |
| Frequency | XXfrequency |
| Maximum transmission power | XXantenna |