FIBARO
FIBARO Walli Dimmer Unit
SKU: FIB_DEU111AS8001
Quickstart
This is a
Important safety information
Please read this manual carefully. Failure to follow the recommendations in this manual may be dangerous or may violate the law. The manufacturer, importer, distributor and seller shall not be liable for any loss or damage resulting from failure to comply with the instructions in this manual or any other material. Use this equipment only for its intended purpose. Follow the disposal instructions. Do not dispose of electronic equipment or batteries in a fire or near open heat sources.Product Description
With the FIBARO Walli Dimmer Unit you always adjust your lighting to the respective occasion. The small flush-mounted module is combined with a visually appealing switch, which can be used to dim the existing lighting.
The small FIBARO Walli Dimmer Unit measures the active power as well as the energy consumption. With its LED ring you are informed about the current energy consumption. The installation is easy and can be carried out according to your individual wishes.
FIBARO Walli Dimmer Unit is compatible with other manufacturers" switch ranges: GIRA System 55, Legrand Celiane and Schneider Odace. An adapter is required for a correct installation.
Check the specifications to see which devices work with FIBARO Walli. If you are pleased with the look of your current sockets or switches, just change the insert and enjoy many smart functions without having to change the design.
The FIBARO Walli Dimmer Unit can be used for the following luminaries:
- conventional incandescent lamps and halogen
- ELV halogen lamps and dimmable LED bulbs (with electronic transformers)
- MLV halogen lamps (with ferromagnetic transformers)
- dimmable LED bulbs
- dimmable compact fluorescent CFL tube lamps
The FIBARO Walli Dimmer Unit can also be used in combination with the well-known FIBARO Bypass 2 (FIB_FGB-002) to dim and switch LED lamps and energy-saving lamps without flickering.
Features:
- Dimmer for existing lighting systems
- Scene control
- Can be used with FIBARO Bypass 2
- Power supply: 110 - 230V, 50/60Hz
- Security: S2
- SmartStart enable
- Wireless technology: Z-Wave Plus
Download high resolution images for FIBARO products.
| Reset to factory default | XXXResetDescription |
| Inclusion | XXXInclusionDescription |
| Exclusion | XXXExclusionDescription |
| NIF | XXXNIF |
| Wakeup | XXXWakeupDescription |
| Protection | XXXProtection |
| FirmwareUpdate | XXXFirmwareUpdate |
| SetAssociation | XXXSetAssociation |
Technical Data
| Dimensions | 0.0500000x0.0500000x0.0420000 mm |
| Weight | 55 gr |
| EAN | 5902701701758 |
| Certification ID | ZC10-19056515 |
| Frequency | Europe - 868,4 Mhz |
| Maximum transmission power | 5 mW |