Quickstart
This is a
secure
On/Off Power Switch for XXXQFrequencyName.
To run this device please connect it to your mains power supply.
To add this device to your network execute the following action:
1. Put the controller into ADD device mode. Follow the instructions provided by the controller manufacturer.2. Touch and hold any key on the panel for more than 5 seconds. All indication lights will blink in blue color. At this point release the key, the touch panel will start the inclusion process.
Important safety information
Please read this manual carefully. Failure to follow the recommendations in this manual may be dangerous or may violate the law.
The manufacturer, importer, distributor and seller shall not be liable for any loss or damage resulting from failure to comply with the instructions in this manual or any other material.
Use this equipment only for its intended purpose. Follow the disposal instructions.
Do not dispose of electronic equipment or batteries in a fire or near open heat sources.
Attention: This manual is automatically generated from
Z-Wave Alliance Product
data and may be incomplete. Please refer to the
Manufacturers Manual for more information.
Product Description
A Smart Home deserves something much better than an ordinary switch. Hogar touch panels are a one-of-a-kind collection of switches, dimmers, and scene controllers that will transform walls from boring to absolutely, breath-taking.Hogar Touch Panels are a fine amalgamation of beauty, style, convenience and functionality. The smooth, gleaming, glossy and glass effect Touch Panels challenge common perceptions of a light switch, electrical socket or dimmer and add a touch of elegance to your smart home.The Hogar Controls ten-touch panels feature a stunning glass face with advanced capacitive touch sensors. It allows users to turn the devices on/off with a touch. The red/blue illumination clearly indicates its working state.A one of a kind solution for all your smart home needs, the mechanical structure of the ten-touch panel provides you with the flexibility of suiting any gang box size of US standard electrical boxes. It is simple to install and easy to use with its innovative assembly, plug-and-play feature and completely retrofit design.These Touch Panels are designed for a wide range of purposes where every button can be programmed to work either in switch or scene mode. Combine switches, fan dimmers, light dimmers and scene controllers at the comfort of your conventional gang boxes.The innovative design and chic styling coupled with advanced functionalities make it a delight for users.
| Reset to factory default |
Using a screwdriver press the config button 5 times.All indication lights will blink in red color. Touch panel will start local reset. Touch panel switch will erase network inclusion state after local reset. Please use this procedure only when the network primary controller is missing or otherwise inoperable. |
| Inclusion |
1. Put the controller into ADD device mode. Follow the instructions provided by the controller manufacturer.2. Touch and hold any key on the panel for more than 5 seconds. All indication lights will blink in blue color. At this point release the key, the touch panel will start the inclusion process. |
| Exclusion |
1. Put the controller into REMOVE device mode. Follow the instructions provided by the controller manufacturer.2. Touch and hold any key on the panel for more than 5 seconds. All indication lights will blink in blue color. At this point release the key, the touch panel will start the exclusion process. |
| NIF |
XXXNIF |
| Wakeup |
XXXWakeupDescription |
| Protection |
XXXProtection |
| FirmwareUpdate |
XXXFirmwareUpdate |
| SetAssociation |
XXXSetAssociation |
Association Groups:
| Group Number |
Maximum Nodes |
Description |
| 1 |
5 |
Name: LifelineCommand:Device Reset Locally NotificationSwitch Binary Report |
| 2 |
5 |
Name: HGT-01Command:Basic SetSend Basic Set command to the other node in this association group when active endpoint 1. |
| 3 |
5 |
Name: HGT-01Command:Switch Binary SetSend Switch Binary Set command to the other node in this association group when active endpoint 1. |
| 4 |
5 |
Name: HGT-02Command:Basic SetSend Basic Set command to the other node in this association group when active endpoint 2. |
| 5 |
5 |
Name: HGT-02Command:Switch Binary SetSend Switch Binary Set command to the other node in this association group when active endpoint 2. |
| 6 |
5 |
Name: HGT-03Command:Basic SetSend Basic Set command to the other node in this association group when active endpoint 3. |
| 7 |
5 |
Name: HGT-03Command:Switch Binary SetSend Switch Binary Set command to the other node in this association group when active endpoint 3. |
| 8 |
5 |
Name: HGT-04Command:Basic SetSend Basic Set command to the other node in this association group when active endpoint 4. |
| 9 |
5 |
Name: HGT-04Command:Switch Binary SetSend Switch Binary Set command to the other node in this association group when active endpoint 4. |
Technical Data
| Hardware Platform |
ZM5202 |
| Device Type |
On/Off Power Switch |
| Network Operation |
Always On Slave |
| Firmware Version |
HW: 2 FW: 2.05 |
| Z-Wave Version |
6.81.01 |
| Certification ID |
ZC10-18116304 |
| Z-Wave Product Id |
0x0293.0x0003.0x441A |
| Loads Controlled |
8 |
| Neutral Wire Required |
ok |
| Electric Load Type |
Dimmable ELV (Magnetic)Dimmable FluorescentDimmable LEDDimmable MLV (Magnetic)ELV (Electronic)FluorescentIncandescentInductive (e.g. Motor)LEDMLV (Magnetic) |
| Firmware Updatable |
Updatable by Professional/Technician |
| Frequency |
XXfrequency |
| Maximum transmission power |
XXantenna |
