Quickstart
This is a
secure
Door Lock - Keypad for XXXQFrequencyName.
To run this device please make sure the internal battery is fully charged.
To add this device to your network execute the following action:
Tap "add device" on your app, then tap enter to lock.Enter programming code -> confirm -> Enter 9 -> confirmIf you hear 2 long beeps from your lock the programming was successful.If you hear short 3 beeps from your lock you must start over again.
Important safety information
Please read this manual carefully. Failure to follow the recommendations in this manual may be dangerous or may violate the law.
The manufacturer, importer, distributor and seller shall not be liable for any loss or damage resulting from failure to comply with the instructions in this manual or any other material.
Use this equipment only for its intended purpose. Follow the disposal instructions.
Do not dispose of electronic equipment or batteries in a fire or near open heat sources.
Attention: This manual is automatically generated from
Z-Wave Alliance Product
data and may be incomplete. Please refer to the
Manufacturers Manual for more information.
Product Description
Delaney Hardwares ZW300 Touchscreen Smartlock offers convenience and security for residential entry doors. Entry is made via touchscreen code, mobile app, or mechanical key. With Delaneys smart home control app, a homeowner can manage who is entering their home from anywhere. ANSI Grade 3 lock with motor-driven deadbolt Keypad accommodates thirty user codes of four to eight digits, and a single-use code, with code-probing prevention and disablement after five attempts (warned with beeps and LED and then 45-seconds downtime) Delaney app utilizes Z-Wave Plus via 128-bit AES encryption, mesh networking technology, and history log. It integrates with other Z-Wave devices such as doorbells with cameras, door and window sensors, outlet controls, heat and smoke sensors, thermostats, and water leak sensors via a security-enabled Z-Wave hub, which conveniently connects through your home WiFi, or plugs into your modem.Configurable auto-locking (from 10-99 seconds)Vacation mode with time-configurable deactivation during which all user codes are disabled such that only the mechanical key.ANSI A156.25 compliance (water, dust, corrosion resistance)Easy installation in standard doors with just a screwdriver (no hard wiring)
Reset to factory default |
Press the R button for more than 5 seconds; the programming is reset back to the original factory codes once you hear 3 long beeps.Please use this procedure only when the network primary controller is missing or otherwise inoperable. |
Inclusion |
Tap "add device" on your app, then tap enter to lock.Enter programming code -> confirm -> Enter 9 -> confirmIf you hear 2 long beeps from your lock the programming was successful.If you hear short 3 beeps from your lock you must start over again. |
Exclusion |
Tap "remove device" on your app, then tap enter to lock.Enter programming code -> confirm -> Enter 9 -> confirmIf you hear 2 long beeps from your lock the programming was successful.If you hear short 3 beeps from your lock you must start over again. |
NIF |
XXXNIF |
Wakeup |
Touch the touchscreen |
Protection |
XXXProtection |
FirmwareUpdate |
XXXFirmwareUpdate |
SetAssociation |
XXXSetAssociation |
Association Groups:
Group Number |
Maximum Nodes |
Description |
1 |
5 |
Z-Wave Plus Lifeline |
Technical Data
Hardware Platform |
ZM5101 |
Device Type |
Door Lock - Keypad |
Network Operation |
Listening Sleeping Slave |
Firmware Version |
HW: 1 FW: 1.02:01.00 |
Z-Wave Version |
6.71.01 |
Certification ID |
ZC10-18096229 |
Z-Wave Product Id |
0x040D.0x0003.0x0001 |
Color |
Chrome |
Outdoor Use |
ok |
Door Lock Type |
Deadbolt |
Frequency |
XXfrequency |
Maximum transmission power |
XXantenna |