This is a
To include or exclude the device you only need to press and hold any key for 8 seconds.
The MCO_TPS312 is a glass-surface wireless actuator able to to switch two separate loads up to 1100 W. It is designed for application in UK Pattress boxes (according to British Standard). Beside local switching the device can be used to control two groups of directly associated devices or scenes stored in the central controller. A blue LED on every button indicates the switching status. The installation of the device requires a 3 wire system with neutral wire.
Caution: The device is only for British standard socket!
Important: Please make sure you have cut off power supply before you start to install the device.
The actuator is operated by the local switching Touch pannels or wirelessly using Z-Wave commands.
Reset to factory default |
Note:If factory settings are restored, all INDICATION LEDs on the panel will turn orange, and all switches will turn off. |
Inclusion | To include the device you only need to press and hold any key for 8 seconds. |
Exclusion | To exclude the device you only need to press and hold any key for 3 seconds. |
NIF | XXXNIF |
Wakeup | XXXWakeupDescription |
Protection | XXXProtection |
FirmwareUpdate | XXXFirmwareUpdate |
SetAssociation | XXXSetAssociation |
Group Number | Maximum Nodes | Description |
---|---|---|
1 | 5 | Switch Button Group 1 |
2 | 5 | Switch Button Group 2 |
3 | 1 | all Status Reports |
Dimensions | 0.0860000x0.0860000x0.0430000 mm |
Weight | 180 gr |
EAN | 6928954200601 |
IP Class | IP IP20 |
Voltage | 230 V |
Load | 1150 W |
Device Type | On/Off Power Switch |
Generic Device Class | Binary Switch |
Specific Device Class | Binary Power Switch |
Firmware Version | 01.00 |
Z-Wave Version | 03.43 |
Certification ID | ZC08-14080012 |
Z-Wave Product Id | 0x015f.0x3102.0x0202 |
Frequency | Europe - 868,4 Mhz |
Maximum transmission power | 5 mW |