This is a
Z-Wave is the international wireless protocol for communication in the Smart Home. This device is suited for use in the region mentioned in the Quickstart section.
Z-Wave ensures a reliable communication by reconfirming every message (two-way communication) and every mains powered node can act as a repeater for other nodes (meshed network) in case the receiver is not in direct wireless range of the transmitter.
This device and every other certified Z-Wave device can be used together with any other certified Z-Wave device regardless of brand and origin as long as both are suited for the same frequency range.
If a device supports secure communication it will communicate with other devices secure as long as this device provides the same or a higher level of security. Otherwise it will automatically turn into a lower level of security to maintain backward compatibility.
For more information about Z-Wave technology, devices, white papers etc. please refer to www.z-wave.info.
Be safe and sound - With frient Smart Siren (EU-Version)
Imagine always having a frient who tells you if something at home isn’t right. You know, someone outspoken who can raise their voice and scare away intruders – all day every day, even in case of power outages.
Let’s get loud
The siren can make loud sounds to scare away intruders, burglars, or in-laws … Really, though, it can scare away whomever you choose. At a volume of 90 dBm, you can be sure no one will overhear the alarm.
This Zigbee Siren comes with a battery backup, so it"s always there to give alarm when needed - even when there"s a power outage.
As if that’s not enough, the frient Smart Siren can also function as a Zigbee signal extender and strengthen wireless communication between your other Zigbee devices. For instance, if some of your devices have a weak signal because they’re behind a brick wall.
?Safe home, peace of mind?
The Smart Siren is a highly advanced device with a siren, range extender, and battery backup. It offers advanced technology in a user-friently design to give you peace of mind. The various features of the Smart Siren will make your home safer and your smart home stronger.
With a little help from your frients
Do you like spending quality time with instruction manuals? No? Fear not. The frient Smart Siren is easy to install and connects to your devices wirelessly.
Features:
Download high resolution images for frient products.
Please read the user manual before installing the product.
In order to include (add) a Z-Wave device to a network it must be in factory default state. Please make sure to reset the device into factory default. You can do this by performing an Exclusion operation as described below in the manual. Every Z-Wave controller is able to perform this operation however it is recommended to use the primary controller of the previous network to make sure the very device is excluded properly from this network.
ATTENTION: only authorized technicians under consideration of the country-specific installation guidelines/norms may do works with mains power. Prior to the assembly of the product, the voltage network has to be switched off and ensured against re-switching.
On factory default the device does not belong to any Z-Wave network. The device needs to be added to an existing wireless network to communicate with the devices of this network. This process is called Inclusion.
Devices can also be removed from a network. This process is called Exclusion. Both processes are initiated by the primary controller of the Z-Wave network. This controller is turned into exclusion respective inclusion mode. Inclusion and Exclusion is then performed doing a special manual action right on the device.
Here are a few hints for network installation if things dont work as expected.
Dimensions | 0.0490000x0.1190000x0.0250000 mm |
Weight | 134 gr |
EAN | 5713594004044 |
Certification ID | ZIG20323ZB330816-24 |
Frequency | XXfrequency |
Maximum transmission power | XXantenna |